Mechanics of materials and materials, Materials/Mechanics of materials

Influence of Elastic Modulus of Matrix on Conductivity of VGCF Dispersed in Plastic Matrix
Toi Aoki, Noboru Nakayama, Masaomi Horita, Hiroaki Fukui
Materials Science Forum, 1016, 243-249, 2021, Refereed

Development of joining method by cylindrical pin using thermal expansion of CFRTP
Yuya KODAIRA, Nobuhiko KOBAYASHI, Naofumi KODAIRA, Atuko TAKEI, Noboru NAKAYAMA
Advanced Experimental Mechanics, 5, 110-115, 2020, Refereed

CFRTPの熱膨張を利用したアルミニウム合金との異種接合
中山昇，小平裕也
軽金属溶接, 58(4), 270-274, 2020, Refereed

Strength and Stress of the Strapped Adhesive Joints made of Hinoki Cypress and Bamboo Plate under Tensile Loadings
Tsuchiya, Yoshihiro; Nakayama, Noboru; Higuchi, Izumi
Mokuzai Gakkaishi, 2020, Refereed

CFRTPとアルミニウムの接合技術
中山 昇, 小平 裕也
プラスチックスエージ, 65(3), 34-39, 2019, Refereed

CFRTPの熱膨張を利用した接合に及ぼすオートクレーブ成形条件の影響
小平 裕也, 小林 信彦, 小平 直史, 武井 敦子, 中山 昇
塑性と加工, 60(705), 289-294, 2019, Refereed

Titanium fiber plates for bone tissue repair
Takizawa, Takashi; Nakayama, Noboru; Haniu, Hisao; Aoki, Kaoru; Okamoto, Masanori; Nomura, Hiroki; Tanaka, Manabu; Sobajima, Atsushi; Yoshida, Kazushige; Kamanaka, Takayuki; Ajima, Kumiko; Oishi, Ayumu; Kuroda, Chika; Ishida, Haruka; Okano, Satomi; Kobayashi, Shinsuke; Kato, Hiroyuki; Saito, Naoto;
ADVANCED MATERIALS, 30(4), 2018, Refereed

CFRTPの熱膨張を利用したアルミニウム合金との異種接合
小平　裕也，小林　信彦，小平　直史，西條　甲一，武井　敦子，中山　昇　
塑性と加工, 59(690), 135-140, 2018, Refereed

Effect of Taper Angle on Measurement for Three-axis Load Sensor
Shohei KOBAYASHI1 and Noboru NAKAYAMA
Advanced Experimental Mechanics, 1, 262-268, 2016, Refereed

Stress and Strength Analysis of Adhesively Bonded Bamboo and Hinoki Cypress Single-Strapped Joint Under Tensile Loads
Yoshihiro TSUCHIYA, Noboru NAKAYAMA and Izumi HIGUCHI
Advanced Experimental Mechanics, 1, 143-148, 2016, Refereed

粉末冶金を利用した機能性材料の開発
中山昇
塑性と加工, 56(651), 270-274, 2015, Refereed

Development of Flexible Contact Sensor for Load Measurement Using Hemispherical Elastic Body
Shohei KASUGA, Noboru NAKAYAMA, Sung-Moo SONG and Hiroyuku TAKEISHI
Journal of the Japanese Society for Experimental Mechanics, 14, s158-s164, 2014, Refereed

Effect of Sintering Temperature on Mechanical Properties of Titanium Fiber Thin Plate Formed by Compression Shearing Method at Room Temperature
Noboru. NAKAYAMA, Hiroto. TAMAI, Masaomi. HORITA, Hiroyuki. MIKI, Hideyuki UTSUMI and Hiroyuku. TAKEISHI
Journal of the Japanese Society for Experimental Mechanics, 14, s226-s231, 2014, Refereed

Micro-hole Inspection System Using Low-Frequency Sound
Yoshinori NAGASU, Kakumasa EGUCHI, Kazunori ITOH, Makoto OTANI and Noboru NAKAYAMA
Journal of the Japanese Society for Experimental Mechanics, 14, S105-s109, 2014, Refereed

Effect of Powder Shape and Size on Mechanical Properties of Al Thin Plate Formed by Compression Shearing Method at Room Temperature
Noboru Nakayama, Masaomi Horita, Shota Sakagami, Hiroyuki Miki, Takamichi Miyazaki, Hiroyuku Takeishi
Procedia Engineering, 81, 1163-1168, 2014, Refereed

Effect of Uniaxial Compressive Stress during Formation of Porous Aluminum by Mechanochemical Reaction on its Mechanical Properties
K. Sawamoto, Noboru Nakayama
Advanced Materials Research, 922, 632-637, 2014, Refereed

Joining process for plates using plastic deformation with rotating tool and pilot hole
Noboru Nakayama , Takayoshi Ikeda, Naoki. Kobayashi , Masaomi Horita
Procedia Engineering, 81, 2048 – 2055, 2014, Refereed

Mechanical and Electrical Properties of Carbon Nanofiber Dispersed Ti Composite Formed by Compression Shearing Method at Room Temperature
Noboru Nakayama , M. Horita, H. Miki, T. Takagi, H. Takeishi
Materials Science Forum, 783-786, 2485-2490, 2014, Refereed

Fabrication of WS2-Dispersed Al Composite Material by Compression Shearing Method at Room Temperature
Noboru Nakayama, Shota Sakagami, Masaomi Horita, Hiroyuki Miki, Ayaka Takahashi, and Keizo Hashimoto
Key Engineering Materials, 622-623, 1066-1074, 2014, Refereed

低周波音響信号利用による微細穴検査技術:—検査に使用する周波数と検査分解能の関係—
長洲 慶典; 中山 昇; 伊東 一典; 大谷 真; 江口 穫正;
精密工学会誌, 80(11), 1023-1030, 2014, Refereed

Micro-hole inspection using audible sound
Yoshinori Nagasu, Kakumasa Eguchi, Takeshi Kazama, Seiichi Kudo, Kazunori Itoh, Makoto Otani, Noboru Nakayama, Eimatsu Sakagami, and Tsuyoshi Mukaiyama
Acoustical Science and Technology, 34(5), 371-373, 2013, Refereed

Effect of Aspect Ratio on the Internal Structure of Titanium Fiber Formed by the Compression Shearing Method at Room Temperature
Noboru NAKAYAMA, Naoki IZAWA, Masaomi HORITA, Naoto SAITO, Hiroyuki MIKI and Hiroyuku TAKEISHI
Journal of the Japanese Society for Experimental Mechanics, 13, s126-S130, 2013, Refereed

純水と純アルミニウム粉末の化学反応によるアルミニウム多孔質材料の成形
中山 昇; 望月 隆介; 澤本 一樹;
日本機械学会論文集 A編, 79(802), 827-837, 2013, Refereed

常温圧縮せん断法により成形された純Ti 薄板の微細組織
堀田 将臣; 中山 昇; 三木 寛之; 宮崎 孝道; 武石 洋征;
塑性と加工, 54(625), 186-190, 2013, Refereed

常温圧縮せん断法により成形したTi/Al 薄板の引張特性に及ぼすミリング時間の影響
堀田 将臣; 中山 昇; 三木 寛之; 宮崎 孝道; 武石 洋征;
塑性と加工, 54(625), 181-185, 2013, Refereed

常温圧縮せん断法により成形した純Al 薄板の微細組織に及ぼす粉末粒径・形状の影響
中山 昇; 堀田 将臣; 三木 寛之; 宮崎 孝道; 武石 洋征;
塑性と加工, 54(625), 191-195, 2013, Refereed

Biocompatibility and bone tissue compatibility of alumina ceramics reinforced with carbon nanotubes
Ogihara, Nobuhide; Usui, Yuki; Aoki, Kaoru; Shimizu, Masayuki; Narita, Nobuyo; Hara, Kazuo; Nakamura, Koichi; Ishigaki, Norio; Takanashi, Seiji; Okamoto, Masanori; Kato, Hiroyuki; Haniu, Hisao; Ogiwara, Naoko; Nakayama, Noboru; Taruta, Seiichi; Saito, Naoto;
NANOMEDICINE, 7(7), 981-993, 2012, Refereed

Dynamic Molding of Powder Particles at Room Temperature
Hiroyuki Miki, Noboru Nakayama and Hiroyuku Takeishi
Materials Science Forum, 706-709, 1955-1960, 2012, Refereed

Effect of Aspect Ratio of the Elastic Body of a Flexible Sensor for Three-axis Measurement of Normal and Shearing Loads
Noboru NAKAYAMA, Kang Ning TAN, Sung-Moo SONG, Hiroyuku TAKEISHI and Takuya SUZUKI
Journal of the Japanese Society for Experimental Mechanics, 12, s145-s150, 2012, Refereed

CONSOLIDATION OF Ti POWDER BY A COMPRESSION ROTATION SHEARING SYSTEM AT ROOM TEMPERATURE -Effect of pivot rotation speed on consolidation-
N. Nakayama, S. Kato,H. Takeishi, and H. Miki
Advanced Materials Research, 4091, 3-8, 2012, Refereed

Effect of Shearing Strain on Mechanical Properties of Titanium Thin Plate by Compression Shearing Method at Room Temperature
Masaomi Horita, Noboru Nakayama, Naoto Saito, Hiroyuki Miki, Takamichi Miyazaki, Hiroyuku Takeishi
Steel Research International, Special edition, 803-806, 2012, Refereed

オーステナイト系ステンレス鋼の繰返しすべり摩擦における初期摩耗から定常摩耗への遷移判別
石田 和義; 中山 昇; 岡田 勝蔵;
トライボロジスト, 56(4), 240-247, 15 Apr. 2011, Refereed

Effect of Probe Shape on Joint Strength of Friction Stir Welded Cold-Worked Die Steel
Sano, Haruki; Nakayama, Noboru; Takeishi, Hiroyuku;
Steel Research International, 81(9), 1116-1119, 2010, Refereed

導電性材料を用いた三軸荷重測定用柔軟接触センサの開発
小林真人，中山昇，宋星武，武石洋征
日本機械学会論文集 Ｃ編, 76(765), 1522-1531, 2010, Refereed

信州大学の諏訪圏精密工業の活性化・人材養成への取り組み
中山　昇，杉本　公一，山沢　清人
工学教育, 57(6), 286-291, 2009, Refereed

弾性球体を用いた三次元柔軟荷重測定センサの開発
中山　昇，鳥井研二，邱建輝，熊沢鉄雄
非破壊検査, 57(6), 286-291, 2008, Refereed

Consolidation of Nd-Fe-B melt-spun ribbon by compression shearing method
Tetsuji Saito, Hisanobu Sato, Hiroyuku Takeishi, and Noboru Nakayama
JOURNAL OF APPLIED PHYSICS, 101, 09K503, 2007, Refereed

Anisotropic Sm-Fe-N magnets produced by compression shearing method
Tetsuji Saito, Hisanobu Sato, Hiroyuku Takeishi, and Noboru Nakayama
APPLIED PHYSICS LETTERS, 89(16), 162511-1-162511-3, 2006, Refereed

PC/LCPブレンドの内部構造と力学特性に及ぼす射出成形条件の影響
邱 建輝; 中山 昇; 熊沢 鉄雄; 陳 国躍; 工藤 素; 鎌田 悟;
高分子論文集, 63(6), 360-367, 2006, Refereed

はんだの変形にともなう起電力発生とその評価
熊沢 鉄雄; 中山 昇; 伊東 伸孝; 坪根 健一郎; 安陪 光紀;
エレクトロニクス実装学会誌, 9(6), 479-484, 2006, Refereed

New method for the production of bulk amorphous materials of Nd-Fe-B alloys
T. Saito, H. Takeishi and N. Nakayama
J. Mater. Res., 20(3), 563-566, 2005, Refereed

動的圧粉を利用したナノサイズダイヤモンド分散固体潤滑機能層の創出
中山　昇，花田　幸太郎，佐野　利男，武石　洋征
実験力学, 5(1), 22-28, 2005, Refereed

Production of amorphous bulk material of an Nd15Fe77B8 magnetic alloy by the compression shearing method
Tetsuji Saito, Hiroyuku Takeishi and Noboru Nakayama
Journal of Alloys and Compounds, (396), 208-211, 2005, Refereed

Production of Bulk Nanocomposite Magnets of An Nd4Fe77.5B18.5 Alloy by Compression Shearing Method
Tetsuji Saito, Hiroyuku Takeishi and NoboruNakayama
IEEE Transaction on Magnetics, 41(10), 3781-3783, 2005, Refereed

常温圧縮せん断法による結晶粒微細固化成形
武石洋征，中山昇，三木寛之
材料, 54(3), 233-238, 2005, Refereed

Characterization of Diamond Nanoclusters and Applications to Self-Lubricating Composites
K. Hanada, K. Umeda, N. Nakayama, M. Mayuzumi, H. Shikata and T. Sano
NEW DIAMOND AND FRONTIER CARBON TECHNOLOGY, 13(3), 133-142, 2003, Refereed

Fabrication of Ti/cluster diamond/TiC in situ composites
K. Hanada, N. Nakayama, M. Mayuzumi, T. Sano
Journal of Materials Processing Technology, (139), 362?367, 2003, Refereed

FRICTION AND MECHANICAL PROPERTIES OF CLUSTER DIAMOND DISPERSED EPOXY RESIN
N. Nakayama, R. Tominaga, M. Mayuzumi, K. Hanada, T. Sano and H. Takeishi
Surface Engineering, 19(6), 437-400, 2003, Refereed

Continuous Monitoring of Resin Content in Prepreg Unidirectional Tapes by Beta-Ray Method
Y. D. Huang, L. Liu, Y. F. Sun, J. H. Qiu, N. Nakayama, T. Kumazawa
Advanced Composites Letters, 11(1), 27-32, 2002, Refereed

Tribological properties of Al-Si-Cu-Mg alloy-based compositedispersing diamond nanocluster
K. Hanada, N. Nakayama, M. Mayuzumi, T. Sano, H. Takeishi
Diamondand Related Materials, 11, 749-752, 2002, Refereed

Processing and characterization of cluster diamond dispersed Al-Si-Cu-Mg composite
K.Hanada, N.Nakayama, M.Mayuzumi, T.Sano
Journal of Materials Processing Technology, 119(1-3), 216-221, 2001, Refereed

Thin - Film Forming of Cluster Diamond-Dispersed Aluminum Composite by Dynamic Compaction
Noboru NAKAYAMA, Masao MAYUZUMI, Kotaro HANADA, Toshio SANO, Ryo TOMINAGA and Hiroyuku TAKEISHI
Journal"Key Engineering Materials", 177-180, 787-792, 2000, Refereed

動的圧粉によるクラスタダイヤモンド分散アルミニウム基複合材料の作製
中山 昇; マユズミ 政男; 花田 幸太郎; 佐野 利男; 武石 洋征;
塑性と加工, 41(474), 716-720, 2000, Refereed

光弾性樹脂からなるフィレットを有するDAP帯板中を伝ぱする応力波パルスの持続時間と応力集中の関係
中山　昇,武石洋征
日本機械学会論文集A編, 65(634), 69-76, 1999, Refereed

動的圧粉体に及ぼすパンチ形状の影響
中山　昇，花田幸太郎，介川直哉，佐野利男，武石洋征
粉体および粉末冶金, 46(7), 735-740, 1999, Refereed

Dynamic Stress Concentration in a Strip Plate with Fillet
Noboru Nakayama, Ohashi Masahiko, Hiroyuku Takeishi
JSME International Journal, 41(3), 326-331, 1998, Refereed

DAP帯板内を伝ぱするひずみ波の減衰特性
中山　昇，涌井　隆，田辺祐治，武石洋征
日本機械学会論文集A編, 63(616), 2548-2553, 1997, Refereed

Measurement of Energy Reflection Coefficient Using Stress Waves
Noboru Nakayama, Toshio Sano, Hiroyuku Takeishi
Journal de physique, Ⅳ, C3-97-102, 1997, Refereed

フィレットを有する帯板中を伝ぱする矩形応力波による応力集中
中山　昇，大橋雅彦，武石洋征
日本機械学会論文集A編, 63(616), 2532-2537, 1997, Refereed

急激な断面変化を有する帯板中の応力波の動的挙動
中山 昇; 武石 洋征; 安本 義正;
非破壊検査, 44(8), 644-648, 1995, Refereed

Consolidation behavior of a mixed Cu and Zn powders processed by warm plastic working
Hiroyuki MIKI, Kazuki NAKAGOSHI, Sho TAKEDA, Shun NAGAI , Noboru NAKAYAMA , Hiroyuki KOSUKEGAWA, Toshiyuki TAKAGI and Hiroyuku TAKEISHI
2018 International Conference on Material Strength and Applied Mechanics (MSAM 2018), 2018

Effect of Shearing Distance on Mechanical and Electrical Properties for Cu-11Mn-4Ni Thin Plate Formed by Compression Shearing Method at Room Temperature
Noboru Nakayama, Inoue Hayato, Kusunoki Hideharu, Horita Masaomi, Kumeda Yoshitaka, Nakamura Keishi
THERMEC’2018, 2018, Invited

Consolidation Behavior of Metal Powders by Compression Shearing Method at Room Temperature
Hiroyuki Miki, Nagai Shun, Takeda Sho, Miyazaki Takamichi, Nakayama Noboru, Kosukegawa Hiroyuki, Takagi Toshiyuki, Takeishi Hiroyuku
THERMEC’2018, 2018

Development of Gunpowder Support Type Hybrid Rocket Engine
Noboru Nakayama, Masaomi Horita, Kazuhiko Sakaki, Keisuke Seki
Fourteenth International Conference on Flow Dynamics, 2017

Effect of Shearing Distance on Transfer Characteristic of Al Thin Plate formed by Compression Shearing Method at Room Temperature
Noboru NAKAYAMA, Shota SAKAGAMI, Masaomi HORITA1, Hiroyuki MIKI, Hiroyuki KOSUKEGAWA and Toshiyuki TAKAGI
International conference on processing & manufacturing of advanced materials (THERMEC’ 2016), 2016

Effect of Taper Angle on Measurement for Three-axis Load Sensor
Shohei KOBAYASHI, Noboru NAKAYAMA
10th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2015

Stress and Strength Analysis of Bamboo and Hinoki Wood Adhesively Bonded Single-strapped Joint under Tensile Loads
Yoshihiro TSUCHIYA, Noboru NAKAYAMA, Izumi HIGUCHI
10th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2015

Effect of Particle Size of Pure Aluminum Powder on Construction of Porous Aluminum Formed by Chemical Reaction
Keita ENDO, Masaomi HORITA, Noboru NAKAYAMA
10th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2015

Technical Development for the Micro Shape Forming used by Compression Shearing Method at Room Temperature
Shota Sakagami，Noboru Nakayama，Toshiyuki Takagi，Hiroyuki Miki and Hiroyuki Kosukegawa
Proceedings of the Fifteenth International Symposium on Advanced Fluid Information 132-133, 2015

Development of Self-lubricating MoS2 Dispersed Metal-based Composite Materials Formed by Compression Shearing Method at Room Temperature
S. Takeda, H. Miki, T. Miyazaki, N. Nakayama, H. Takeishi, and T. Takagi
ELyT Workshop 2015 in Matsushima, 2015

Fabrication of Al/Ti Composite Material by Compression Shearing Method at Room Temperature
Shota Sakagami, Masaomi Horita, Noboru Nakayama, Hiroyuki Miki, Toshiyuki Takagi, Hiroyuki Kosukegawa and Hiroyuku Takeishi
Proceedings of Eleventh International Conference on Flow Dynamics, 2014

Friction Properties of MoS2 Dispersed Cu-based Composite Materials Formed by Compression Shearing Method at Room Temperature
Sho Takeda, Hiroyuki Miki, Noboru Nakayama, Hiroyuku Takeishi, Toshiyuki Takagi
Proceedings of Eleventh International Conference on Flow Dynamics, 2014

Effect of Powder Shape and Size on Mechanical Properties of Al Thin Plate Formed by Compression Shearing Method at Room Temperature
Noboru Nakayama, Masaomi Horita, Shota Sakagami, Hiroyuki Miki, Takamichi Miyazaki, Hiroyuku Takeishi
The 11the International Conference on Technology of Plasticity (ICTP 2014), 2014

Joining process for plates using plastic deformation with rotating tool and pilot hole
Noboru Nakayama , Takayoshi Ikeda, Naoki. Kobayashi , Masaomi Horita
The 11the International Conference on Technology of Plasticity (ICTP 2014), 2014

Friction Coefficient of Al/WS2 Composite Material formed by Compression Shearing Method at Room Temperature
S. Sakagami, N. Nakayama, H. Miki, A. Takahashi, K. Hashimoto, H. Takeishi
The fifth US-Japan NDT SYMPOSIUM 131-137, 2014

Fabrication of WS2-dispersed Al Composite Material by Compression Shearing Method at Room Temperature
Noboru Nakayama, Shota Sakagami, Masaomi Horita, Hiroyuki Miki, Ayaka Takahashi, and Keizo Hashimoto
International Conference on Metal Forming (Metal Forming 2014), 2014

Micro-hole diameter inspection using audible sound
Yoshinori Nagasu, Noboru Nakayama, Kazunori Itoh, Makoto Otani, Keigo Oguchi and Kakumasa Eguchi
Proc. 2014 Machining, Materials and Mechanical Technologies(IC3MT), 2014

Development of Flexible Contact Sensor for Moment Measurement
S. Kasuga, N. Nakayama, H. Takeishi
The fifth US-Japan NDT SYMPOSIUM 124-130, 2014

Mechanical and Electrical Properties of Carbon Nano Fiber-Dispersed Ti Composite Formed by Compression Shearing Method at Room Temperature
N. Nakayama, M. Horita, H. Miki, T.Takagi, H.Takeishi
International conference on processing & manufacturing of advanced materials (THERMEC’ 2013), 2013, Invited

Effect of Compression Stress on the Mechanical Properties of Porous Aluminum Formed using Mechanochemical Reaction Uniaxial Compression
K. Sawamoto, N. Nakayama
International conference on processing & manufacturing of advanced materials (THERMEC’ 2013), 2013

Micro-hole Inspection System Using Low-Frequency Sound
Yoshinori NAGASU, Kakumasa EGUCHI, Kazunori ITOH, Makoto OTANI and Noboru NAKAYAMA
Proceedings of the 8th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2013

Development of Flexible Contact Sensor for Load Measurement Using Hemispherical Elastic Body
Shohei KASUGA, Noboru NAKAYAMA, Sung-Moo SONG and Hiroyuku TAKEISHI
Proceedings of the 8th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2013

Effect of Titanium Content Ration on the Mechanical properties of Ti/Al Composite Material Formed by Compression Shearing Method at Room Temperature
Shota Sakagami, Masaomi Horita, Noboru Nakayama, Hiroyuki Miki, and Hiroyuku Takeishi
Proceedings of The Thirteenth International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, 2013

Micro-Hole Inspection Using Sound Signal
Yoshinori Nagasu, Kakumasa Eguchi, Takeshi Kazama, Seiichi Kudo, Kazunori Itoh, Makoto Otani, Eimatsu Sakagami, Tsuyoshi Mukaiyama, and Noboru Nakayama
Laser Ultrasonics and Advanced Sensing (LU2013), 2013

Effect of Sintering Temperature on Mechanical Properties of Titanium Fiber Thin Plate Formed by Compression Shearing Method at Room Temperature
Hiroto TAMAI, Noboru NAKAYAMA, Masaomi HORITA, Hiroyuki MIKI and Hiroyuku TAKEISHI
Proceedings of the 8th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2013

Effect of Aspect Ratio on the Internal Structure of Titanium Fiber Formed by the Compression Shearing Method at Room Temperature
Noboru NAKAYAMA, Naoki IZAWA, Naoto SAITO, Hiroyuki MIKI, Hideyuki UTSUMI, and Hiroyuku TAKEISHI
ISEM’12, 2012

Effect of Shearing Strain on Mechanical Properties of Titanium Thin Plate by Compression Shearing Method at Room Temperature
Masaomi Horita, Noboru Nakayama, Naoto Saito, Hiroyuki Miki, Takamichi Miyazaki, Hiroyuku Takeishi
Proceedings of the 14th International Conference on Metal Forming, 2012

Fabrication of Ti/Al Composite Material by Compression Shearing Method at Room Temperature
Syou Takeda, Noboru Nakayama, Masaomi Horita, Shintaro Abe, Hiroyuki Miki and Hiroyuku Takeishi
Proceedings of The Twelfth International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration 136-137, 2012

MECHANICAL PROPERTIES OF TITANIUM/ALUMINUM COMPOSITE MATERIAL BY COMPRESSION SHEARING METHOD AT ROOM TEMPERATURE
M. Horita, N. Nakayama, N. Saito, H. Miki, H. Takeishi, H. Mugishima, T. Suzuki
ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 2012

CONSOLIDATION OF Ti POWDER BY A COMPRESSION ROTATION SHEARING METHOD UNDER ROOM TEMPERATURE: Effect of pivot rotation speed on consolidation forming
S. Kato, N. Nakayama, H. Takeishi, and H .Miki
International conference on processing & manufacturing of advanced materials (THERMEC’ 2011), 2011

Effect of Shape Change of The Elastic Model of The Flexible Sensor for Three-Axis Load Measurement of Normal Load and Shearing Load
Kang Ning Tan, Noboru Nakayama, Masato Kobayashi and Sung-Moo Song
39Th North American manufacturing research conference, 2011

Consolidation of Ti-6Al-4V Powder by a Compression Rotation Shearing Method at Room Temperature
Sou Kato, Noboru Nakayama, Hiroyuki Miki, Hiroyuku Takeishi
Proceedings of The Eleventh International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration 114-115, 2011

Effect of Changing the Aspect Ratio of the Elastic Model of the Flexible Sensor for Three-axis Load Measurement on Normal Load and Shearing Load Measurement
Kang Ning TAN, Noboru NAKAYAMA, Hiroaki FUKUI, Sung-Moo SONG, Hiroyuku TAKEISHI, and Takuya SUZUKI
The 6th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2011

Friction properties of the molybdenum disulfide dispersed Al-Si-Cu-Mg based composite material prepared by the dynamic molding
H. Miki, N. Nakayama, H. Takeishi and T. Takagi
38th LEEDS-LYON SYMPOSIUM ON TRIBOLOGY, 2011

A novel method of solidifying powdered material under compression and shear force at room temperature
H. Miki, N. Nakayama and H. Takeishi
International conference on processing & manufacturing of advanced materials (THERMEC’ 2011), 2011

Consolidation of Ti powder by a Compression Rotation Shearing Method under Room Temperature
S. Kato, N. Nakayama, H. Miki and H. Takeishi
Proceedings of The Tenth International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration, 2010

Effect of probe shape on joint strength of friction stir welded cold-worked die steel
Haruki Sano, Noboru Nakayama, Hiroyuku Takeishi
Metal Forming 2010, 2010

Development of Carbon Nanofiber-Containing Cold-Work Die Steel by Compression Rotation Shearing Method Under Room Temperature - Effect of Carbon Nanofiber’s Volume Ratio on Frictional Property and Mechanical Property
Shinya Tokutake, Noboru Nakayama, Hiroyuku Takeishi, and Toru Matsuura
Transactions of NAMRI/SMI 38 655-661, 2010

Effect of Tool Rotation on the Joint Strength of Cold-Work Die Steel by Friction Stir Welding
Haruki Sano, Noboru Nakayama, and Hiroyuku Takeishi
Transactions of NAMRI/SMI 38 437-442, 2010

Fabrication of Composite Material by Compression Shearing Method under Room Temperature
N. Nakayama, H. Miki and H. Takeishi
Proceedings of The Ninth International Symposium on Advanced Fluid Information and Transdisciplinary Fluid Integration 86-87, 2009

FORMING OF FULLERENE-DISPERSED ALUMINUM COMPOSITE BY THE COMPRESSION SHEARING METHOD
Noboru NAKAYAMA, Hiroyuku TAKEISHI
ICEM13 (13th International Conference on Experimental Mechanics), 2007

DYNAMIC DEFORMATION EVALUATION BY ELECTROMOTIVE FORCE
Tetsuo Kumazawa, Noboru Nakayama
ICEM13 (13th International Conference on Experimental Mechanics), 2007

FLEXIBLE THREE-DIMENSIONAL LOAD MEASUREMENT SENSOR USING AN ELASTIC SPHERE
Kenji TORII, Noboru NAKAYAMA, Jianhui QIU, Tetsuo KUMAZAWA
ICEM13 (13th International Conference on Experimental Mechanics), 2007

FRICTION COEFFICIENT OF CLUSTER DIAMOND-DISPERSED ALUMINUM COMPOSITE BY COMPRESSION SHEARING METHOD
N. Nakayama, H. Takeishi
The 7th China-Japan Joint Conference on Composites (CJJCC-7), 2006

Fabrication of a Solid Lubricating Layer Containing Dispersed Diamond Nanoparticles
Noboru Nakayama, Tetsuo Kumazawa, Jianhui Qiu, and Kotaro Hanada
Surface Modification Technologies XVIII 203-207, 2006

Forming of Cluster Diamond-Dispersed Aluminum Composite by Compression Shearing Method
N. Nakayama, H. Takeishi
The 4th International Conference on Materials Processing for Properties and Performance, 2005

Fabrication of Solid Lubricating Layer With Dispersed Diamond Nanoparticles
NAKAYAMA, N.
18th International Conference on Surface Modification Technologies - SMT 18, 2004, Invited

Deformation measurement technique by electromotive force
Tetsuo Kumazawa, Noboru Nakayama
ICEM12 (12th International Conference on Experimental Mechanics), 2004

Tribological Properties of Al-Si-Cu-Mg Alloy Based Composite Dispersing Diamond Nanocluster
K. Hanada, N. Nakayama, M. Mayuzumi, T. Sano, H. Takeishi
Diamond 2001(12th European Conference on Diamond), 2001

Fabrication of Cluster Diamond-Dispersed Al-Si-Cu-Mg Alloy Composite by Dynamic Compaction
Noboru NAKAYAMA, Masao MAYUZUMI, Kotaro HANADA, Toshio SANO, Ryo TOMINAGA and Hiroyuku TAKEISHI
IMCC’2000 International Manufacturing Conference, 2000

Fabrication of Ti/Cluster Diamond/Tic In-Situ Composites
Hanada K., Nakayama N., Mayuzumi M., Sano T.
IMCC’2000 International Manufacturing Conference, 2000

Friction and mechanical properties of Cluster Diamond-Dispersed Polymer
N. NAKAYAMA, M. MAYUZUMI, K. HANADA, T. SANO, R. TOMINAGA and H. TAKEISHI
The Seventh annual International Conference on Composites Engineering (ICCE/7), 2000

Mechanical Properties of Ti/Cluster Diamond/TiC In-Situ Compoiste
K.Hanada, N.Nakayama, M.Mayuzumi, T.Sano
Proceedings of the 7th Annual International Conference on Composites Engineering (ICCE/7), 2000

Thin Film Forming of Pure Aluminum Powders by Dynamic Compaction
N. Nakayama, K. Hanada, T. Sano, S. Horikoshi and H. Takeishi
Proceedings of the International Conference on Technology of Plasticity 1321-1326, 1999

On the Dynamic Behavior of Stress Waves Propagating in Strip Plate with Fillet
Noboru Nakayama, Hiroyuku Takeishi and Toshio Sano
Impact Response of Materials and Structures. 3rd International Symposium on Impact Engineering, 1998

Dynamic Stress Concentration Factor in the Strip Plate with Fillet
Noboru Nakayama, Masahiko Ohashi, Toshio Sano, Satoko Horikoshi, Hiroyuku Takeishi
Association DYMAT, EURO DYMAT 97, 1997

DYNAMIC BEHAVIOR OF STRESS PULSE IN STRIP PLATES WITH SUDDEN CHANGE IN CROSS SECTION
N. Nakayama, H. Takeishi, T. Sano, Y. Yasumoto
PROCEEDINGS OF THE ASIAN-PACIFIC CONFERENCE ON STRENGTH OF MATERIALS AND STRUCTURES (APCSMS ’96), 1996

粉末冶金を利用した機能性材料の開発

2007, 3, 0, 0, 0