Doctor of Engineering

Applied Textile Mechanics(Computational mechanics, Composite Materials)

2005 - 2012
信州大学繊維学部　准教授

1996 - 2005
Faculty of Textile Science and Technology, Shinshu University Lecturer

1994 - 1996
Faculty of Textile Science and Technology, Shinshu University Assistant

1994, Shinshu University, Graduate School, Division of Engineering, 生物機能工学

2013
強化プラスチック協会賞(論文賞)
FRPなみの繊維含有率を持つ連続繊維強化FRTPの成型法の開発

2012
Best Poster Award: Textile Bioengineering and Informatics Symposium(TBIS2012)
Improving Fiber Bag Cleaning Efficiency Using Multiple Jet Pulses

2011
Excellent Thesis award; 2011 China Textile Academic Conference
Study on Improving Fabric Filter Performance of a Bag Filter Dust Collector

2010
Conference on Mechatronics, Best paper award; 7th China International Silk Conference
Friction Decrease of Airbags with Air

2010
The 7th China International Silk Conference, Best paper award; 6th China-Japan International Conference Mechatronics(CJCM2010)
Mechanical Charactereitics of Tire Rubber Filled with Polymer Micro-Fiber

2008
Conference on Mechatronics, Best paper award　organizing committee China- Japan Conference on mechatronics.
Evaluation of Particle Erosion Behavior of Procon Fiber under Various Temperatures.

2007
Conference on Mechatronics, Best paper award　organizing committee China- Japan Conference on mechatronics.
High Particle Erosion Resistance Behavior of Unidirectional Dyneema Fiber–Reinforced Plastic Composites.

2003
日本衝撃波研究会, Best Presentation award Japan Shock Wave Institute

1996
社会法人繊維学会, 繊維学会論文賞
非線形な力学特性を考慮した布の静的及び動的な変形に関する研究

Mechanisms of Solid Particle Erosion Damage in the Repair of Damaged Composite Structures
ADVANCED COMPOSITE MATERIALS, 31(4), 385-398, 2022

Consideration of Yarn Anisotropy in the Investigation of the Puncture Resistance of Fibrous Materials
Polymers, 14, 883-890, 2022

Effect of alkali and silane treatments on properties of green composites based on ramie fibers and plant-derived resins
BioResources, 17(2), 2390-2402, 2022

Method for evaluating flexible protective materials in water jet work and investigation of associated destructive
Mechanical Engineering Journal, 9(3), 22-00003, 2022

Initial damage and influence of material properties on the puncture response of the Aramid yarn-reinforced epoxy composite
Composites Science and Technology, 225(7), 109481, 2022

Boosting the performance of CFRP with high axial compression characteristics fabricated using the filament cover method: Surface modification of sheath filament PBO fiber and improvement of reinforcing fiber volume fraction
Journal of Textile Engineering, 67, 104-109, 2021

繊維工学の技術を融合した高力学特性を有する先進複合材料の設計・開発
鮑　力民
日本機械学会誌, 124(11), 14-15, 2021

A Study of Reusability Assessment and Thermal Behaviors for Thermoplastic Composite Materials After Melting Process: Polypropylene/ Thermoplastic Polyurethane Blends
Journal of Cleaner Production, 279, 1-10, 2021

Development of lignin-based carbon foam for use as an FRP sandwich core material
Polymer Composites, 42(2), 634-641, 2021

Surface Modification of Carbon Fiber Using a Titania Solution and the Mechanical Properties of CFRTP Fabricated using that Method
Journal of Textile Engineering, 67(5), 85-90, 2021

Thermoplastic Polyurethane Reinforced with Continuous Carbon Fiber Tows: Manufacturing Technique and Fabric Property Evaluation
Applied Composite Materials, 28, 1531-1546, 2021

Extrusion/Hot Pressing Processing and Laminated Layers of Continuous Carbon Fiber/Thermoplastic Polyurethane Knitted Composites
Polymer International, 71(3), 283-291, 2021

Improvement of Bending Strength of FRP Using the Filament Cover Method
The Journal Of Textile Institute, 111(2), 183-188, 2020

Polypropylene/thermoplastic polyurethane blends: mechanical characterizations, recyclability and sustainable development of thermoplastic materials
Journal of Materials Research and Technology, 9(3), 5304-5312, 2020

Effect of Melting–Recycling Cycles and Mechanical Fracture on the Thermoplastic Materials Composed of Thermoplastic Polyurethane and Polypropylene Waste Blends
Applied Sciences-Basel, 10(17), 5810-5824, 2020

円筒構造曲げ特性の測定法の開発と新防刃服構造の一例
Journal of Textile Engineering, 66(5), 71-76, 2020

Applying TPU blends and composite carbon fibers to flexible electromagnetic-shielding fabrics: Long-fiber-reinforced thermoplastics technique
Composites Part A: Applied Science and Manufacturing, 138, 2020

Mechanical and Static Stab Resistant Properties of Hybrid-Fabric Fibrous Planks: Manufacturing Process of Nonwoven Fabrics Made of Recycled Fibers
Yu-Chun Chuang, Limin Bao, Mei-Chen Lin, Ching-Wen Lou and TingAn Lin
Polymers, 11, 1140, 2019

Investigation of the recycling of continuous-fiber-reinforced thermoplastics
Bing Liu, Peng Zhu, Anchang Xu and Limin Bao
Journal of Thermoplastic Composite Materials, 32(3), 342-356, 2019

Development of a Simple Molding Method for Continuous Fiber Reinforcement FRP in Shapes with Highly Curved Corners
Limin BAO, Kentarou SUZUKI, Jian SHI
Journal of Textile Engineering, 65(2), 19-24, 2019

Fabric Composites Reinforced with Thermally Bonded and Irregularly Aligned Filaments: Preparation and Puncture Resistant Performance
Yu-Chun Chuang, Limin Bao, Mei-Chen Lin , Ting An Lin and Ching-Wen Lou
Polymers, 11(4), 706-716, 2019

Hybrid-Fiber-Reinforced Composite Boards Made of Recycled Aramid Fibers: Preparation and Puncture Properties
Yu-Chun Chuang, Limin Bao, Ching-Wen Louand Jia-Horng Lin
Fibers and Polyme, 20(2), 398-405, 2019

Buffering sandwiches made of thermoplastic polyurethane honeycomb grids: Manufacturing technique and property evaluations
Yu-Chun Chuang, Limin Bao, Pey Yu Chen, Ching-Wen Louand Jia-Horng Lin
Journal of Sandwich Structures and Materials, in press, 2018

Effect of covering filaments on the compression performance and failure mechanism of unidirectional fiber-reinforced plastic
Fangtao Ruan and Limin Bao
Polymer Composites, 39, 247-253, 2018

Improving bending characteristics of FRP sandwich structures with reinforcement webs
Limin BAO, Yuki MIURA, Kiyoshi KEMMOCHI
ADVANCED COMPOSITE MATERIALS, 27, 221-233, 2018

A simple repair method for GFRP delamination using ultraviolet curable resin
Limin BAO, Takuya OKAZAWA, Anchang XU, Jiang SHI
ADVANCED COMPOSITE MATERIALS, 27, 349-259, 2018

Effects of hot water absorption and desorption on solid particle erosion of poly(ethylene terephthalate)-based composites
Liu Bing, Zhu Peng, Bao Limin
J Fiber Bioeng Inform., 11, 29-39, 2018

Development of flexible stab-proof textiles impregnated with microscopic particles, Journal of Textile Engineering
BAO Limin, SATO Shunsuke, Wang Yaling, Wakatsuki Kaoru, MORIKAWA Hideaki
Journal of Textile Engineering, 63, 43-48, 2017

柔軟性を考慮したガレキの突き刺しに強いドライスーツ材料の開発
鮑　力民, 堀内　皇貴, 坂口明男, 若月　薫，森川英明
Journal of Textile Engineering, 63, 197-200, 2017

Development of a high-density nonwoven structure to improve the stab resistance of protective clothing material
Limin Bao, Yanling Wang, Takeichiro Baba, Yasuhiro Fukuda, Kaoru Wakatsuki, Hideaki Morikawa
Industrial Health, 55, 513-520, 2017

Preparation of carbon fiber-reinforced thermoplastics with high fiber volume fraction and high heat-resistant properties
Bing Liu, Anchang Xu and Limin Bao
Journal of Thermoplastic Composite Materials, 30, 724-737, 2017

Preparation of double-coated TiO2 nanoparticles using an anchoring grafting method and investigation of the UV resistance of its reinforced PEI film
Peng Zhu, Bing Liu, Limin Bao
Progress in Organic Coatings, 104, 81-90, 2017

Erosion characteristics and mechanical behavior of new structural hybrid fabric reinforced polyetherimide composites
Bing Liu, AnchangXu, LiminBao
Wear, 368-369, 335-343, 2017

Improved longitudinal compression performance of a unidirectional fiber reinforced composite with a filament covering
Fangtao Ruan, Limin Bao
Polymer Composites, 37(11), 3127–3133, 2016

Improving stab-resistant textile materials with a non-woven fabric structure
BAO Limin, SATO Shunsuke, MORIKAWA Hideaki, SOMA Shinya
Journal of Textile Engineering, 62, 37-42, 2016

セルロース樹脂と連続繊維を用いた高繊維含有率GFRTPの開発
鮑 力民, 南木 裕司，板倉 雅彦, 徐　安長
強化プラスチック, 62, 471-477, 2016

Effects of fiber orientation angles of fiber-reinforced plastic on sand solid particle erosion behaviors
Limin Bao, Hijjazulkifli Kameel, Kiyoshi Kemmochi
ADVANCED COMPOSITE MATERIALS, 25, 81-93, 2016

Effect of fabric orientation and impact angle on the erosion behavior of high-performance thermoplastic composites reinforced with ductile fabric
Bing Liu, Limin Bao, Anchang Xu
Wear, 352-353, 24-30, 2016

高繊維含有率・高耐熱性を有する連続繊維強化FRTPの成形法
鮑 力民，劉 兵, 徐 安長, 剱持　潔
強化プラスチック, 61(4), 193-197, 2015

A method for self-healing of CFRP using optical fibers
BAO Limin, UCHIJO Chika, RUAN Fangtao, KEMMOCHI Kiyoshi
Journal of Textile Engineering, 61(3), 23-29, 2015

Preparation of carbon fiber-reinforced thermoplastics with high fiber volume fraction and high heat-resistant properties
Bing Liu, Anchang Xu, Limin Bao
Journal of Thermoplastic Composite Materials, 1-14, 2015

Influence of fibers on the dust dislodgement efficiency of bag filters
Bao, L; Musadiq, M; Kijima, T; Kenmochi, K
Text. Res. J., 84(7), 764-771, May 2014

Mechanical Enhancement of UHMWPE Fibers by Coating with Carbon Nanoparticles
Ruan, FT; Bao, LM
Fibers and Polymers, 15(4), 723-728, Apr. 2014

バグフィルター構造による払い落し効率への影響
鮑力民，M. Musadiq，阮芳涛, 木嶋敬昌, 剱持潔
Journal of Textile Engineering, 60(4), 60-75, 2014

Low-velocity impact response and compression after impact assessment of recycled carbon fiber-reinforced polymer composites for future applications
Jian Shi, Limin Bao, Kiyoshi Kemmochi
Polymer Composite, 35, 1494-1506, 2014

Damage Charcteristics of Dry Sand Erosion of Fiber in a Hot Environment
BAO Limin, LI Dongling
J. Text.Eng., 59(1), 1-6, 2013

カーボン／高強度ポリエチレン繊維ハイブリッドFRPにおけるエロージョン特性
鮑力民、銭丹娜、山本剛、山中敦彦、劔持潔
日本複合材料学会誌, 39(2), 72-77, 2013

繊維のドライサンドエロージョン損傷特性とその評価法
鮑力民、剣持潔
繊維機械学会誌, 66(11), 683-688, 2013

FRPなみの繊維含有率を持つ連続繊維強化FRTPの成形法の開発
鮑　力民，徐　安長, 藤井　拓郎, 剱持　潔, 西田　光生
強化プラスチック, 59(12), 483-441, 2013

An FRP erosion prediction system and the effect on mechanical characteristics of FRP by optical fiber
Limin Bao, Kenichi Akahane, Kiyoshi Kemmochi
Adv. Composite Mat., 21, 133-145, 2013

Molding of PBO fabric reinforced thermoplastic composite to achieve high fiber volume fraction
Anchang Xu, Limin Bao, Mitsuo Nishida, Atsuhiko Yamanaka
Polym. Composite, 34, 953-958, 2013

Manufacture of Fabric Reinforced Thermoplastic Composites with High Fiber Volume Fraction
Anchang Xu, Limin Bao
Adv. Mat. Res., 796, 301-305, 2013

Reusing recycled fibers in high-value fiber-reinforced polymer composites: Improving bending strength by surface cleaning
Shi, Jian; Bao, Limin; Kobayashi, Ryouhei; Kato, Jun; Kemmochi, Kiyoshi
Composites Science and Technology, 72(11), 1298-1303, Jun. 2012

繊維強化プラスチックにおけるドライサンドエロージョンの特性
鮑力民、剣持潔
繊維機械学会誌, 65(9), 530-536, 2012

FRP相間破壊靭性に充てん中空フィラーが及ぼす影響
鮑力民、黒田勇貴、徐安長、剣持潔
日本複合材料学会誌, 38(3), 101-106, 2012

Determination of Creep Life of Glass Fiber/Phenol Coposite Filled with Carbon Nanotubes by Four-Point Fkexual Creep Test
A. Xu, H. Nozaki, L. Bao, K. Kemmochi
Jpn. J. Appl. Phys., 51(1), o1AK03-1～5, 2012

Solid Particle Erosion Characteristics of Composites Filled with Nano Carbon Fibers
L. Bao, D. Qian, G. Wang, K. Kemmochi
J. Text.Eng., 58(2), 13-19, 2012

Measurement and Evaluation Methods for Damage from Dry Sand Erosion in a Hot Environment
L. Bao, D. Li, D. Qian, K. Kemmochi, A. Yamanaka
Text. Res. J., 82(15), 1612-1617, 2012

Electric Capacity Characteristic of of Nanofiber/Vulcanized Rubber
Limin Bao, Yuya Kumazaki, Kiyoshi Kemmochi, and Naoya Amino
Adv. Composite Mat., 20(1), 65-78, 2011

Optimum Decomposition Conditions for Glass Fiber Reinforced Plastic Recycling by Superheated Steam
Jian Shi and Limin Bao
Jpn. J. Appl. Phys, 50(1), 01AJ01-01AJ05, 2011

バグフィルター集塵機におけるマルチパルスジェットによるダストの払い落とし効率の向上
鮑力民，郁明々, 木嶋敬昌, 夘山貞信, 剱持潔
日本機械学会論文集C編, 77(1), 179-186, 2011

光ファイバセンサによるFRPエロージョンの予知
鮑　力民、赤羽賢一、施　建、剱持　潔
日本複合材料学会誌, 37(6), 209-215, 2011

Improvement of Erosion Behavior and mechanical strength of UP Resin Composites filled with VGCF
D. Qian, A. Xu, L. Bao, M. Takatera
Appl. Mech. Mat., 43, 712-716, 2011

Structural Analysis of a Teat Cup Liner
L. Bao, A. Adachi, O. Yamazaki
Appl. Mech. Mat., 43, 675-677, 2011

Development of recycling System for Fiber-Reinforced Plastics by Superheated Steam
J. Shi, S. Wada, K. Kemmochi, L. Bao
Key Eng. Mat., 464, 414-418, 2011

Research on FRP Composite Structures with Self-healing Function
C. Uchijo, Y. Kuroda, K. Kemmochi, L. Bao
Adv. Mat. Res., 332-334, 31-34, 2011

Development of Hybrid FRP Materials with Super Fibers for Improving Impact Properties
Z. Gong, K. Kemmochi, L. Bao
Adv. Mat. Res., 332-334, 678-682, 2011

Research in Recycling Technology of Fiber Reinforced Polymers for Reduction of Environmental Load:Optimum Decomposition Conditions of Carbon Fiber Reinforced Polymers in the Purpose of Fiber Reuse
J. Shi, K. Kemmochi, L. Bao
Adv. Mat. Res., 343-344, 142-149, 2011

Friction Characteristics of Fabrics with Air
L. Bao, Y. Umena, K. Kemmochi
J. Text. Inst., 102(7), 598-603, 2011

ストリングス間隔・張力・粘性によるボールの反発挙動への影響
鮑　力民, 轟　純一, 銭　丹娜, , 剱持　潔
Journal of Textile Engineering, 56(1), 1-8, 2010

ナノ繊維充てんゴムのひずみに伴う電気容量の変化
鮑　力民, 熊崎　裕也, 銭　丹娜, 剱持　潔, 網野直也
日本複合材料学会誌, 36(1), 4-10, 2010

空気層を利用したエアバッグにおける摩擦力の低減
鮑　力民，梅名裕士，銭　丹娜，高寺政行，剱持　潔
日本機械学会論文集A編, 76(761), 69-74, 2010

Improvement of the Bending Characteristics of Thin FRP Cylinders by Imitating Nodes of Bamboo
Limin BAO, Natsuki KAMADA, Danna QIAN
ADVANCED COMPOSITE MATERIALS, 19(2), 157-170, 2010

スモック技法を利用した織物の曲面形成について
篠原　昭、鮑　力民
信州短期大学紀要, 21, 1-5, 2010

Fiber-reinforced polymer composite materials with high specific strength and excellent solid particle erosion resistance
Danna Qian, Limin Bao, Masayuki Takatera, Kiyoshi Kemmochi and Atsuhiko Yamanaka
Wear, 268(3-4), 637-642, 2010

Dry Sand Erosion Damage Characteristic of　Fibers Induced by Solid Particle Impact,
Limin BAO, Yasuyuki Sato, Danna QIAN, Satoshi Simakawa, Zhijuan Pan and Shigeru Hinata
Text. Res. J., 80(16), 1675-1681, 2010

An Impact Abrasion Tester based on Mechanical Change of Fibers
Y. Gao, L. Bao
J. Text. Res. China, 30(12), 121-124, 2009

Discussion on abrasion mechanism and testing means of fibrous filtration materials.
Y. Gao, L. Bao
Technic. Text., 223, 45-48, 2009

Study on wear measurement techniques for alumino-silicate fiber blanket etc. materials.
Y. Gao, L. Bao
Technic. Text., 221, 42-46, 2009

Particle Erosion Behavior ofUnidirectional CF and GF Hybrid Fiber - Reinforced Plastic Composites
QIAN Danna, BAO Limin, TAKATERA Masayuki, KEMMOCHI Kiyoshi,
J. Text. Eng., 55(2), 39-44, 2009

Impact Force when Fabric Inflates at High Speed
Limin Bao and Kiyoshi Kemmochi
Text. Res. J., 79(9), 837-843, 2009

繊維および糸におけるエロージョンの測定と評価法
鮑　力民, 銭　丹娜, 佐藤康之, 島川 聡,高寺　政行, 日向　滋, 剱持潔
日本機械学会論文集A編, 74(3), 428-433, 2008

竹を模倣した節付きFRP薄肉円筒の開発
鮑　力民, 鎌田夏葵, 銭　丹娜, 白井智広, 後藤　卒土民, 剱持　潔
日本複合材料学会誌, 34(6), 219-225, 2008

エアバッグにおける緩衝特性に関する研究
鮑　力民，西城　英莉，銭　丹　娜，高寺　政行，剱持　潔
日本機械学会論文集A編, 74(11), 1453-1458, 2008

Relationship Between Uniaxial and Strip Biaxial Tensile Properties of Fabrics
Jiaming Xheng, Takuya Komatsu, Masayuki Takatera. Shigeru Inui, Limin Bao, Yoshio Shimizu
Text. Res. J., 78(3), 224-231, 2008

バグフィルタを通過する混相流動の可視化とバグフィルタ摩耗機構に関する研究
島川　聡, 日向　滋,　鮑　力民,　渡辺　義見,　木嶋　敬昌,　清水　秀彦
混相流, 21(3), 288-296, 2007

VGCF充てんによる加硫ゴムの引裂き物性の向上
鮑　力民, 桜井正幸, 前田 聡代,網野直也
日本機械学会論文集A編, 73(11), 1253-1258, 2007

織物の力学特性が衝撃力に与える影響
鮑　力民, 高寺政行, 劒持　潔
日本機械学会論文集C編, 73(12), 3193-3197, 2007

Relationship Between Strain and Electrical Resistivity of Vulcanized Rubber Filled with Carbon Nanofiber
L. Bao, K. Todaka, I. Yamaura, Z. Pan, N. Amino and K. Kemmochi,
Open Mat. Sci. J., 1, 13-17, 2007

畳の敷き方についての－考察
篠原　昭, 鮑　力民
信州短期大学紀要, 19, 26-29, 2007

充てん剤補強加硫ゴムの引裂き物性に及ぼす時間，温度の影響
鮑　力民, 桜井正幸, 鑓　恵介,網野直也, 三橋健八
日本機械学会論文集A編, 73(2), 232-237, 2007

ファイバセンサによるバグフィルタの寿命予知
島川　聡, 日向　滋,　鮑　力民,　渡辺　義見,　木嶋　敬昌,　清水　秀彦
計測自動制御学会産業論文集, 5(6), 35-42, 2006

繊維強化プラスチック3Rパッチの可能性
剱持　潔, 榎本祐嗣, 鮑　力民, 後藤　卒土民
強化プラスチック, 52(7), 295-301, 2006

Analytical modeling of suction cups used for window-cleaning robots
J. Liu, K. Tanaka, L. Bao, I. Yamaura
Vacuum, 80(6), 593-598, 2006

A Study on the Torsional Wave of Fiber Reinforced Composite Materials
L. BAO, H. YUAN, M. SAKURAI, M. NAKAZAWA, and K. KEMMOCHI
Journal of Composite Materials, 40(4), 383-391, 2006

A novel approach for evaluating the air permeability of airbag fabrics
X.H.Wang, L.Bao and M. Nakazawa
T.R.J., 76(1), 66-70, 2006

エアバッグの高速展開による衝撃力の測定 : エアバッグの高速展開による衝撃力I(機械力学,計測,自動制御)
鮑 力民，桜井正幸，劒持　潔
日本機械学会論文集C編, 72(719), 2214-2218, 2006

FRP積層円筒の緩衝特性(機械力学,計測,自動制御)
鮑　力民；梅田大輔；桜井正幸；劒持　潔
日本機械学会論文集. C編, 71(702), 380-385, 2005

Relation Between Frictional Characteristics and the Strings' Ability to Make a Tennis Ball Spin
L. BAO, M. SAKURAI and M.NAKAZAWA
T.R.J, 73(7), 570-574, 2003

織物の力学的特性がMITドレープ挙動に与える影響
鮑　力民,高寺政行,澤田 宏一,桜井正幸,中沢　賢,篠原　昭
繊維学会誌, 58(3), 77-83, 2002

FRP積層円筒のねじり減衰特性
鮑　力　民，田村明博,　桜井正幸,　中沢　賢,　劒持　潔
日本複合材料学会誌, 28(2), 50-55, 2002

M.I.Tドレープと織物の力学特性の関係
鮑　力民;高寺政行;澤田宏一;桜井正幸;中沢　賢;篠原　昭
繊維学会誌, 58(3), 77-83, 2002

Restitution characteristics of yarns in the axial direction
L. BAO, M. SAKURAI, M.TAKATERA, M.NAKAZAWA and A.SHROHARA
T.R.J, 72(8), 689-692, 2002

ラケット・ストリングスの反発性能の評価(機械力学,計測,自動制御)
鮑　力民,桜井　正幸,小山　恭史,中沢　賢,篠原　昭
日本機械学会論文集C編, 68(665), 96-100, 2002

テニスストリングスによるボールスピンのかかり具合の評価(機械力学,計測,自動制御)
鮑　力民,　桜井　正幸,　中沢　賢
日本機械学会論文集. C編, 68(676), 3486-3490, 2002

テニスストリングスの剛体との反発挙動の測定
鮑力民;高寺政行;飯田一;岩本大栄;篠原昭
日本機械学会論文集C編, 65(630), 580-586, 1999

直径方向の力学特性を考慮したテニスストリングの反発挙動の解析
鮑 力民;高寺 政行;飯田 一;小山　恭史;篠原 昭
日本機械学会論文集C編, 65(632), 1319-1324, 1999

せん断変形を拘束しない1軸荷重による織物の大変形
高寺政行;雲田直子;鮑力民;清水義雄;上條正義;細谷聡;飯田一
繊維学会誌, 55(7), 306-314, 1999

一軸引張り試験による織物の見掛けのせん断剛性の測定
鮑力民;高寺政行;篠原昭;山下重和
繊維学会誌, 53(4), 139-145, 1997

一軸伸張による織物の見掛けのポアソン比測定における誤差の評価
鮑力民;高寺政行;篠原昭
繊維学会誌, 53(1), 20-26, 1997

曲げヒステリシスを考慮した布の大たわみ挙動の解析
鮑　力民;高寺政行;篠原　昭
繊維学会誌, 52(2), 69-75, 1996

Post-buckling behavior of silk fabric and prediction
M.Takatera/ L.Bao /A.Shinohara
J.Seric.Sci.Jpn, 65(6), 477, 1996

両端を固定した布の大たわみにおける自重と初期たわみの影響
鮑　力民;高寺政行;篠原　昭
繊維学会誌, 52(1), 18-26, 1996

曲げヒステリシスを考慮した織物の曲げ振動
鮑　力民
繊維学会誌, 50, 92, 1994

非線形最小自乗法による布の曲げ振動特性値の推定
高寺政行;鮑　力民;篠原　昭
繊維学会誌, 50(8), 335-342, 1994

曲げヒステリシスを考慮した織物の振動解析
鮑　力民;高寺政行;篠原　昭
繊維学会誌, 50(2), 92-96, 1994

布の曲げ振動における自重の影響
鮑　力民，高寺政行，篠原　昭
繊維学会誌, 49, 383-386, 1993

布の動的曲げ剛性と静的曲げ剛性
鮑　力民，高寺政行，篠原　昭
繊維学会誌, 49(12), 642-647, 1993

自己修復材料、自己組織化、形状記憶材料の開発と応用事例
鮑力民, 第4章 実用化に向けた自己修復機能を持つ高強度スマートFRPの研究開発－生物毛細血管を模倣したFRP層間き裂の自己修復
技術情報協会, 235-242 Mar. 2020

次世代のポリマー・高分子開発,新しい用途展開と将来展望
鮑力民, 第10章第1節 バイオミメティック・デザインによる高強度軽量構造体の開発
技術情報協会, 559-564 Feb. 2019

はじめて学ぶ繊維
鮑　力民
工業調査会, 132-146 2008

Improving Stab-resistant of Textile Materials,
Limin BAO
2st International Symposium on Advanced Fiber Technology and Material Application, 15 Dec. 2018

Trend of research and development on composite material in Japan
Limin BAO
Japan-China Textile & Composite Symposium 2018, 08 Sep. 2018

Textile technology and development of high performance composite material
Limin BAO
International Industrial Fiber and Textile Conference, Nov. 2017

Improving bending characteristics of CFRP sandwich structures with reinforcement webs
Limin BAO
Japan-China Textile&Composite Symposium, Sep. 2017

EVAPORATION-INDUCED SURFACE MODIFICATION OF PBO FIBER AND INVESTIGATION ITS UV RESISTANCE
Peng Zhu, Limin Bao
21st International Conference on Composite Materials, Aug. 2017

Improvement of compressive performance of fiber reinforced plastic by the textile technology
Limin Bao, Ryo Sakurada, Fangtao Ruan
Cross-straits Conference on Textiles, May 2017

Character of erosion and mechanical behavior of a new structural hybrid reinforced PEI composite
Liu Bing, Bao Limin
The 9th International Silk Conference (ISC 2016, China), Sep. 2016

Development of High Density Nonwoven Structure for Improving Stab Resistance
Yanling Wang, Limin Bao, Morikawa Emei, Takeichiro Baba, Yasuhiro Fukuda
The 9th International Silk Conference (ISC 2016, China), Sep. 2016

Fabrication of surface-modified TiO2 nano particle composite
Zhu Peng, Bao Limin
The 9th International Silk Conference (ISC 2016, China), Sep. 2016

Preparation of double-coated TiO2 nanoparticles and investigation of the UV resistance of its reinforced PEI film
Peng Zhu, Limin Bao
The 12th China-Japan Joint Conference on Composite Materials (CJJCC-12), Sep. 2016

Development of a composite material with high mechanical properties by the textile technology
Limin BAO
International Symposium on Advanced Fiber Technology and Material Application, Jul. 2016

Discovery of the new feature, new molding method of advanced continuation fiber-reinforced plastics for sustainable circulation society
Limin BAO
The 63th Taiwan textile process Society conference, Dec. 2015

Study on solid erosion properties of fiber-reinforced thermoplastics with high heat-resistant properties
Liu Bing, Bao Limin
The 13th Asian Textile Conference, Nov. 2015

Improvement of flexural properties of FRP by filament cover method
Ryo Sakurada, Fangtao Ruan, Bao Limin
The 13th Asian Textile Conference, Nov. 2015

Influence of nonwoven fabric structure of bag filters on the dust dislodgement efficiency
Limin BAO, M. Musadiq, TAKAMASA Kishima
2015 China Textile Academic Conference, Oct. 2015

Development of molding method of continuous fiber-reinforced thermoplastics (FRTP) to achieve a high fiber volume fraction with high mechanical properties
Limin BAO
2014 China Textile Academic Conference, Oct. 2014

The discovery of the new feature, new molding method of advanced continuation fiber-reinforced plastics for sustainable circulation society
Limin BAO
Academic forum on advanced textile materials and processing technique, Dec. 2013

PBO fabric reinforced thermoplastic composite manufactured by solution impregnation method
A. Xu, L. Bao
19th International Conference on Composite Materials (ICCM19), 2013

Study on the plasticity of fiber reinforced plastic under bending moment
A. Xu, J. Shi, L. Bao
42nd Textile Research Symposium at Mt. Fuji, 2013

Polymer re-using of waste fiber reinforced polymer by superheated steam
J. Shi, L.Bao, K. Kemmochi
POLYCHAR21 World Forum on Advanced Materials, 2013

Mechanical Property of Recycled Fiber Reinforced Polymer Composites by Superheated Steam
J. Shi, J. Kato, L. Bao, K. Kemmochi
2013 Asian Pacific Conference on Mechatronics and Control Engineering, 2013

Compression after Impact Properties of Recycled Glass Fiber Reinforced Polymer
J. Shi, J. Kato, L. Bao, K. Kemmochi
21th Annual International Conference on Composites/Nano Engineering, 2013

High Value Fiber Recycling of Waste Fiber Reinforced Plastic for Sustainable Society
J. Shi, A. Xu, L. Bao
42nd Textile Research Symposium at Mt. Fuji, 2013

Improvement in Adhesion Property of Recycled Glass Fiber
J. Shi, L.Bao, K. Kemmochi
8th International Silk Conference, 2013

Nanoparticles Coated UHMWPE Fiber by Pyrrole Vapour Deposition to Improve Transversal Compressive Strength
R. Fangtao, L. Bao
POLYCHAR21 World Forum on Advanced Materials, 2013

Surface Modification of UHMWPE Fiber for Improving Compressive Modulus of UFRP
R. Fangtao, L. Bao
42nd Textile Research Symposium at Mt. Fuji, 2013

The Effect of Web Member on Bending Characteristic of CFRP Sandwich Structure
Y. Miura, M. Ono, L.Bao, K. Kemmochi
12th Asian Textile Conference, 2013

Nano-carbon Particles Coated UHMWPE Fiber by Pyrrole Vapour Deposition to Improve Transversal Compressive and Bend Strength
R. Fangtao, L. Bao
12th Asian Textile Conference, 2013

Development of New Molding Method for CFRP with High Fiber Fraction and Its Mechanical Properties
T. Fujii, A. Xu, L.Bao, K. Kemmochi
12th Asian Textile Conference, 2013

Effect of Decomposition Parameters on Tesile Strength of Recycled Glass Fiber
J. Shi, J. Kato, L. Bao, K. Kemmochi
10th China-Japan Joint Conference on Composits(CJCC-10), 2012

Fiber Reinforced Plastic with High Specific Strerngth and Excellent Solid Particle Erosion Resistance
L. Bao, D. Qian, K. Kemmochi
10th China-Japan Joint Conference on Composits(CJCC-10), 2012, Invited

Improving Fiber Bag Cleaning Efficiency Using Multiple Jet Pulses
L. Bao, M.M. Yu, T. Kishina, K. Kemmochi
Textile Bioengineering and Informatics Symposium(TBIS2012), 2012

Improving the Creep Life of Glass Fiber Reinforced Plastic Composite by Carbon Nanotubes
A. Xu, L. Bao, K. Kemmochi
10th China-Japan Joint Conference on Composits(CJCC-10), 2012

Research in Recycling Technology of Fiber Reinforced Polymers by Superheated Steam; Effect of Surface Treatment on Recycled Glass Fiber
J. Shi, R. Kobayashi, L. Bao
36th International Conference and Expo on Advanced Ceramics and Composites, 2012

Solid Particle Erosion Resistance of the Super Fiber Reinforced Plastic
L. Bao, D. Qian
2012 China Textile Academic Conference, 2012, Invited

Electric Characteristics of the Carbon Nanotube Filling Rubber and Application to a Large Strain Sensor
L. Bao
International Panel Discussion for New Technology 1-5, 12 May 2011, Invited

Research in Recyling Technology of the Fiber Reinforced Polymers for Reduction of Environmental Load: Optimum Decomposition Conditions of Carbon Fiber Reinforced Polymers in the Purpose of Fiber Reuse
J. Shi, K. Kmmochi, L. Bao
2011 International Conference on Materials for Environmental Protection and Energy Application, 2011

Creep Life of GFRP Composite Illed with CNTs
X. Anchang, H. Nozaki, L. Bao, K. Kemmochi
2011 China Textile Academic Conference, 2011

Development and Research of Sustainable Recycling Technology of Fiber Reinforced Plastics
J. Shi, S. Wada, J. Kato, K. Kemmochi, L. Bao
2011 China Textile Academic Conference, 2011

Study on Improving Fabric Filter Performance of a Bag Filter Dust Collector
M. M. B. M. Hashim, L. Bao, M. Yu, T. Kishima, S. Uyama, K. Kemmochi
2011 China Textile Academic Conference, 2011

Development of the Evaluation Equipment of Stab Resistance for Textile Materials
S. Soma, T. Bingo, H. Morikawa, L. Bao
2nd Asian Protective Clothing Conference, 2011

Development of the High Strength Light Weight FRP Structure by the Biomimetic Design
L. Bao
2nd Textile Academic Forum, 12 Oct. 2010, Invited

A Strain Sensor which used the Capacity Characteristic of VGCF/Vulcanized Rubber
L. Bao, K. Kemmochi, N. Amino
9th China-Japan Joint Conference on Composites(CJJCC-9), 12 Sep. 2010, Invited

Friction Decrease of Airbags with Air
L. Bao, A. Xu, Y. Umena
7th China International Silk Conference, 12 Sep. 2010

Mechanical Charactereitics of Tire Rubber Filled with Polymer Micro-Fiber
H. Wada, L. Bao, N. Amino
6th China-Japan International Conference Mechatronics(CJCM2010), 12 Sep. 2010

Recycling System for Fiber-Reinforced Plastics
L. Bao, J. Shi, K. Kemmochi
9th China-Japan Joint Conference on Composites(CJJCC-9), 12 Sep. 2010

Development of FRP Composites with Excellent Erosion Resistance by Solid Particles
D.N. Qian, L. Bao, M. Takatera, A. Yamanaka
17th International Conference on Composite Materials (ICCM-17), 2009

Development of FRP Composites with High Specific Strength and Excellent Erosion Resistance
D. Qian, L. Bao, M. Takatera, A. Yamanaka
7th East Asian Symposium on Polymers For Advanced Technologies (EASPAT-2009), 2009

Electric Capacitance Changes under Strain of Nanofiber/Vulcanized Rubber
L. Bao, Y. Kumazaki, D. Qian, N. Amino
10th Asian Textile Conference (ATC-10), 2009

Solid particle erosion behavior of polymer composites filled with VGCF and CB
D. Qian, L. Bao, G. Wang, M. Takatera
10th Asian Textile Conference (ATC-10), 2009

Study of the Relationship between Residual Dust and Dust Dislodgement Efficiency of Bag Filter——Development of the Accelerative Dust Deposit Equipment
M. Yu, L. Bao, K. Takamasa
10th Asian Textile Conference (ATC-10), 2009

Study on Solid Particle Behaviors of FRP Composites --Effect of reinforcement fiber and nano fillers
D. Qian, L. Bao, M. Takatera, A. Yamanaka
5th International Conference on Adovanced Fiber/Textile Materials 2009 in Ueda., 2009

The Possibility of FRP Recycling by Overheated Vapor and the Mechanical Property of Recycled Glass Fiber
J. Shi, L. Bao, S. Wada
10th Asian Textile Conference (ATC-10), 2009

Production Method of Thin FRP Cylinders by Imitating Nodes of Bamboo
L.Bao, D. Qian, S. Gotou, K. Kemmochi
8th China-Japan Joint Conference on Composites (CJJCC-8), Oct. 2008

Study on the Manifestation of Selfhealing from the Integration of Microcapsules and Fiber Reinforced Plastics
K. Kemmochi, T. Kumakura, L. Bao
8th China-Japan Joint Conference on Composites (CJJCC-8), Oct. 2008

Manifestation of noise insulation function in FRP due to disperse bell-structural microcapsules
K. Kemmochi, L. Bao, and S. Gotoh
11th Japan-European Symposium on Composite Materials, Sep. 2008

Evaluation of Particle Erosion Behavior of Procon Fiber under Various Temperatures
D. Li, D. Qian, L. Bao, K. Kemmochi
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

The relationship strain and electric characteristics of rubber filled with VGCFs
Y. Kumazaki, T. Todaka, L. Bao, N. Amino, K. Kemmochi
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Measuring dynamic surface strain and friction coefficient for car tire rubber
S. Takahashi, L. Bao, N. Amino, K. Kemmochi,
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Development of FRP Thin Cylinder with Nodes that Imitate Bamboo
L. Bao, N. Kamada, D. Qian, T. Sshirayi, S. Gotoh, K. Kemmochi
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Manifestation of noise insulation function in FRP due to disperse bell-structural microcapsules
T. Kumakura, K. Kemmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Inverse Manufacturing Technology for Waste Fiber-Reinforced Plastics
Z. Jue, K. Kemmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Improvement of Inter-laminar Shear Strength in Thick FRP Laminates by Dispersing CNT into the Matrix Resin
H. Nozaki, K. Kemmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Mechanical Properties of Monocoque Shell Structures
S. Kondo, K. Kmmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008

Improving Tear Characteristics of Vulcanized Rubber by Filling with vapor-grown carbon fiber
L. Bao, D. Qian, M. Sakurai, S. Maeda, N. Amino
6th China International Silk conference and 2nd International Textile Forum, 2007

Measurement and Evaluation of Erosion Characteristic for Fiber and Yarn
L. Bao, D. Li, Y. Sato, S. Shinakawa, Z. Pan, S. Hinata
6th China International Silk conference and 2nd International Textile Forum, 2007

High Particle Erosion Resistance Behavior of Unidirectional Dyneema Fiber – Reinforced Plastic Composites
D. Qian, L. Bao, M. Takatera, K. Kemmochi, A. Yamanaka
4th Chaina-Japan Conference on Mechatronics 2007 (CJCM 2007), 2007

Visualization of gas-particle two-phase flow passing through the bag-filter and impingingat a single thin fiber by PIV and PTV methods
S. Shimakawa, S. Hinata, Z. Huanjia, T. Mukai, L. Bao, Y. Watanabe
4th China-Japan Conference on Mechatoronics (CJCM2007), 2007

The Possibility of a 3R Patch for Fiber-Reinforced Plastics
N. Kubota，Y. Maekawa，K. Kemmochi，L. Bao, S. Gotoh
4th Chaina-Japan Conference onMechatronics 2007 (CJCM 2007), 2007

Fabrication and the Tensile Property of Intra Hybrid Laminates C50/G50
T. Ohgi, S. Maeda, K. Kemmochi, L. Bao, S. Gotoh
4th Chaina-Japan Conference on Mechatronics 2007 (CJCM 2007), 2007

Particle Erosion Behavior of Hybrid Unidirectional Fiber Reinforced Plastic Composites
D. Qian, L. Bao, K. Kemmochi
36th Textile Research Symposium at Mt. Fuji, 2007

Relationship between strain and electrical characteristics of vulacanized rubber rilled with carbon nanofiber
Y. Kumazaki, T. Todaka, N. Amino, L. Bao
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007

Study on solid particle erosion behavior of unidirectional fiber reinforced plastic composites
D. Qian, L. Bao, M. Takatera, K. Kemmochi, A. Yamanaka
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007

A study on the erosive wear mechanism of bag-filiter
S. Shimakawa, S. HinataI, L. Bao, Y. Watanabe
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007

Research on impact force of fabrics when airbag inflates at high speed
L. Bao, K. Kemmochi
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007

Research on erosion damage of fibers in bag-filter by solid particle impact
L. Bao, Y. Sato, S. Simakawa, Z. Pan, S. Hinata
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007

The Possibility of a 3R Patch for Fiber-Reinforced Plastics
K. Kemmochi,　N. Kubota，Y. Maekawa，S. Gotoh, L. Bao
6th International Symposium on Advanced Composites, 2007, Invited

繊維集合体の動的な非線形挙動の研究

もろい繊維材料のヤング率と引張り強さが同時測定できる方法と、その装置, 1, Patent right
鮑　力民;大橋　明