鮑 力民 (ホウ リキミン)
繊維学部
特任教授
研究者情報
研究活動情報
受賞
- 2013年
強化プラスチック協会賞(論文賞)
FRPなみの繊維含有率を持つ連続繊維強化FRTPの成型法の開発 - 2012年
Best Poster Award: Textile Bioengineering and Informatics Symposium(TBIS2012)
Improving Fiber Bag Cleaning Efficiency Using Multiple Jet Pulses - 2011年
Excellent Thesis award; 2011 China Textile Academic Conference
Study on Improving Fabric Filter Performance of a Bag Filter Dust Collector - 2010年
Conference on Mechatronics, Best paper award; 7th China International Silk Conference
Friction Decrease of Airbags with Air - 2010年
The 7th China International Silk Conference, Best paper award; 6th China-Japan International Conference Mechatronics(CJCM2010)
Mechanical Charactereitics of Tire Rubber Filled with Polymer Micro-Fiber - 2008年
Conference on Mechatronics, Best paper award organizing committee China- Japan Conference on mechatronics.
Evaluation of Particle Erosion Behavior ofProcon Fiber under Various Temperatures. - 2007年
Conference on Mechatronics, Best paper award organizing committee China- Japan Conference on mechatronics.
High Particle Erosion Resistance Behavior of Unidirectional Dyneema Fiber–Reinforced Plastic Composites. - 2003年
日本衝撃波研究会, Best Presentation award Japan Shock Wave Institute - 1996年
社会法人繊維学会, 繊維学会論文賞
非線形な力学特性を考慮した布の静的及び動的な変形に関する研究
論文
- Mechanisms of Solid Particle Erosion Damage in the Repair of Damaged Composite Structures
ADVANCED COMPOSITE MATERIALS, 31(4), 385-398, 2022年 - Consideration of Yarn Anisotropy in the Investigation of the Puncture Resistance of Fibrous Materials
Polymers, 14, 883-890, 2022年 - Effect of alkali and silane treatments on properties of green composites based on ramie fibers and plant-derived resins
BioResources, 17(2), 2390-2402, 2022年 - Method for evaluating flexible protective materials in water jet work and investigation of associated destructive
Mechanical Engineering Journal, 9(3), 22-00003, 2022年
- Initial damage and influence of material properties on the puncture response of the Aramid yarn-reinforced epoxy composite
Composites Science and Technology, 225(7), 109481, 2022年 - Boosting the performance of CFRP with high axial compression characteristics fabricated using the filament cover method: Surface modification of sheath filament PBO fiber and improvement of reinforcing fiber volume fraction
Journal of Textile Engineering, 67, 104-109, 2021年 - 繊維工学の技術を融合した高力学特性を有する先進複合材料の設計・開発
鮑 力民
日本機械学会誌, 124(11), 14-15, 2021年 - A Study of Reusability Assessment and Thermal Behaviors for Thermoplastic Composite Materials After Melting Process: Polypropylene/ Thermoplastic Polyurethane Blends
Journal of Cleaner Production, 279, 1-10, 2021年 - Development of lignin-based carbon foam for use as an FRP sandwich core material
Polymer Composites, 42(2), 634-641, 2021年 - Surface Modification of Carbon Fiber Using a Titania Solution and the Mechanical Properties of CFRTP Fabricated using that Method
Journal of Textile Engineering, 67(5), 85-90, 2021年 - Thermoplastic Polyurethane Reinforced with Continuous Carbon Fiber Tows: Manufacturing Technique and Fabric Property Evaluation
Applied Composite Materials, 28, 1531-1546, 2021年 - Extrusion/Hot Pressing Processing and Laminated Layers of Continuous Carbon Fiber/Thermoplastic Polyurethane Knitted Composites
Polymer International, 71(3), 283-291, 2021年 - Improvement of Bending Strength of FRP Using the Filament Cover Method
The Journal Of Textile Institute, 111(2), 183-188, 2020年 - Polypropylene/thermoplastic polyurethane blends: mechanical characterizations, recyclability and sustainable development of thermoplastic materials
Journal of Materials Research and Technology, 9(3), 5304-5312, 2020年 - Effect of Melting–Recycling Cycles and Mechanical Fracture on the Thermoplastic Materials Composed of Thermoplastic Polyurethane and Polypropylene Waste Blends
Applied Sciences-Basel, 10(17), 5810-5824, 2020年 - 円筒構造曲げ特性の測定法の開発と新防刃服構造の一例
Journal of Textile Engineering, 66(5), 71-76, 2020年 - Applying TPU blends and composite carbon fibers to flexible electromagnetic-shielding fabrics: Long-fiber-reinforced thermoplastics technique
Composites Part A: Applied Science and Manufacturing, 138, 2020年 - Mechanical and Static Stab Resistant Properties of Hybrid-Fabric Fibrous Planks: Manufacturing Process of Nonwoven Fabrics Made of Recycled Fibers
Yu-Chun Chuang, Limin Bao, Mei-Chen Lin, Ching-Wen Lou and TingAn Lin
Polymers, 11, 1140, 2019年 - Investigation of the recycling of continuous-fiber-reinforced thermoplastics
Bing Liu, Peng Zhu, Anchang Xu and Limin Bao
Journal of Thermoplastic Composite Materials, 32(3), 342-356, 2019年 - Development of a Simple Molding Method for Continuous Fiber Reinforcement FRP in Shapes with Highly Curved Corners
Limin BAO, Kentarou SUZUKI, Jian SHI
Journal of Textile Engineering, 65(2), 19-24, 2019年 - Fabric Composites Reinforced with Thermally Bonded and Irregularly Aligned Filaments: Preparation and Puncture Resistant Performance
Yu-Chun Chuang, Limin Bao, Mei-Chen Lin , Ting An Lin and Ching-Wen Lou
Polymers, 11(4), 706-716, 2019年 - Hybrid-Fiber-Reinforced Composite Boards Made of Recycled Aramid Fibers: Preparation and Puncture Properties
Yu-Chun Chuang, Limin Bao, Ching-Wen Louand Jia-Horng Lin
Fibers and Polyme, 20(2), 398-405, 2019年 - Buffering sandwiches made of thermoplastic polyurethane honeycomb grids: Manufacturing technique and property evaluations
Yu-Chun Chuang, Limin Bao, Pey Yu Chen, Ching-Wen Louand Jia-Horng Lin
Journal of Sandwich Structures and Materials, in press, 2018年 - Effect of covering filaments on the compression performance and failure mechanism of unidirectional fiber-reinforced plastic
Fangtao Ruan and Limin Bao
Polymer Composites, 39, 247-253, 2018年 - Improving bending characteristics of FRP sandwich structures with reinforcement webs
Limin BAO, Yuki MIURA, Kiyoshi KEMMOCHI
ADVANCED COMPOSITE MATERIALS, 27, 221-233, 2018年 - A simple repair method for GFRP delamination using ultraviolet curable resin
Limin BAO, Takuya OKAZAWA, Anchang XU, Jiang SHI
ADVANCED COMPOSITE MATERIALS, 27, 349-259, 2018年 - Effects of hot water absorption and desorption on solid particle erosion of poly(ethylene terephthalate)-based composites
Liu Bing, Zhu Peng, Bao Limin
J Fiber Bioeng Inform., 11, 29-39, 2018年 - Development of flexible stab-proof textiles impregnated with microscopic particles, Journal of Textile Engineering
BAO Limin, SATO Shunsuke, Wang Yaling, Wakatsuki Kaoru, MORIKAWA Hideaki
Journal of Textile Engineering, 63, 43-48, 2017年 - 柔軟性を考慮したガレキの突き刺しに強いドライスーツ材料の開発
鮑 力民, 堀内 皇貴, 坂口明男, 若月 薫，森川英明
Journal of Textile Engineering, 63, 197-200, 2017年 - Development of a high-density nonwoven structure to improve the stab resistance of protective clothing material
Limin Bao, Yanling Wang, Takeichiro Baba, Yasuhiro Fukuda, Kaoru Wakatsuki, Hideaki Morikawa
Industrial Health, 55, 513-520, 2017年 - Preparation of carbon fiber-reinforced thermoplastics with high fiber volume fraction and high heat-resistant properties
Bing Liu, Anchang Xu and Limin Bao
Journal of Thermoplastic Composite Materials, 30, 724-737, 2017年 - Preparation of double-coated TiO2 nanoparticles using an anchoring grafting method and investigation of the UV resistance of its reinforced PEI film
Peng Zhu, Bing Liu, Limin Bao
Progress in Organic Coatings, 104, 81-90, 2017年 - Erosion characteristics and mechanical behavior of new structural hybrid fabric reinforced polyetherimide composites
Bing Liu, AnchangXu, LiminBao
Wear, 368-369, 335-343, 2017年 - Improved longitudinal compression performance of a unidirectional fiber reinforced composite with a filament covering
Fangtao Ruan, Limin Bao
Polymer Composites, 37(11), 3127–3133, 2016年 - Improving stab-resistant textile materials with a non-woven fabric structure
BAO Limin, SATO Shunsuke, MORIKAWA Hideaki, SOMA Shinya
Journal of Textile Engineering, 62, 37-42, 2016年 - セルロース樹脂と連続繊維を用いた高繊維含有率GFRTPの開発
鮑 力民, 南木 裕司，板倉 雅彦, 徐 安長
強化プラスチック, 62, 471-477, 2016年 - Effects of fiber orientation angles of fiber-reinforced plastic on sand solid particle erosion behaviors
Limin Bao, Hijjazulkifli Kameel, Kiyoshi Kemmochi
ADVANCED COMPOSITE MATERIALS, 25, 81-93, 2016年 - Effect of fabric orientation and impact angle on the erosion behavior of high-performance thermoplastic composites reinforced with ductile fabric
Bing Liu, Limin Bao, Anchang Xu
Wear, 352-353, 24-30, 2016年 - 高繊維含有率・高耐熱性を有する連続繊維強化FRTPの成形法
鮑 力民，劉 兵, 徐 安長, 剱持 潔
強化プラスチック, 61(4), 193-197, 2015年 - A method for self-healing of CFRP using optical fibers
BAO Limin, UCHIJO Chika, RUAN Fangtao, KEMMOCHI Kiyoshi
Journal of Textile Engineering, 61(3), 23-29, 2015年 - Preparation of carbon fiber-reinforced thermoplastics with high fiber volume fraction and high heat-resistant properties
Bing Liu, Anchang Xu, Limin Bao
Journal of Thermoplastic Composite Materials, 1-14, 2015年 - Influence of fibers on the dust dislodgement efficiency of bag filters
Bao, L; Musadiq, M; Kijima, T; Kenmochi, K
Text. Res. J., 84(7), 764-771, 2014年05月
- Mechanical Enhancement of UHMWPE Fibers by Coating with Carbon Nanoparticles
Ruan, FT; Bao, LM
Fibers and Polymers, 15(4), 723-728, 2014年04月 - バグフィルター構造による払い落し効率への影響
鮑力民，M. Musadiq，阮芳涛, 木嶋敬昌, 剱持潔
Journal of Textile Engineering, 60(4), 60-75, 2014年 - Low-velocity impact response and compression after impact assessment of recycled carbon fiber-reinforced polymer composites for future applications
Jian Shi, Limin Bao, Kiyoshi Kemmochi
Polymer Composite, 35, 1494-1506, 2014年 - Damage Charcteristics of Dry Sand Erosion of Fiber in a Hot Environment
BAO Limin, LI Dongling
J. Text.Eng., 59(1), 1-6, 2013年 - カーボン／高強度ポリエチレン繊維ハイブリッドFRPにおけるエロージョン特性
鮑力民、銭丹娜、山本剛、山中敦彦、劔持潔
日本複合材料学会誌, 39(2), 72-77, 2013年 - 繊維のドライサンドエロージョン損傷特性とその評価法
鮑力民、剣持潔
繊維機械学会誌, 66(11), 683-688, 2013年 - FRPなみの繊維含有率を持つ連続繊維強化FRTPの成形法の開発
鮑 力民，徐 安長, 藤井 拓郎, 剱持 潔, 西田 光生
強化プラスチック, 59(12), 483-441, 2013年 - An FRP erosion prediction system and the effect on mechanical characteristics of FRP by optical fiber
Limin Bao, Kenichi Akahane, Kiyoshi Kemmochi
Adv. Composite Mat., 21, 133-145, 2013年 - Molding of PBO fabric reinforced thermoplastic composite to achieve high fiber volume fraction
Anchang Xu, Limin Bao, Mitsuo Nishida, Atsuhiko Yamanaka
Polym. Composite, 34, 953-958, 2013年 - Manufacture of Fabric Reinforced Thermoplastic Composites with High Fiber Volume Fraction
Anchang Xu, Limin Bao
Adv. Mat. Res., 796, 301-305, 2013年 - Reusing recycled fibers in high-value fiber-reinforced polymer composites: Improving bending strength by surface cleaning
Shi, Jian; Bao, Limin; Kobayashi, Ryouhei; Kato, Jun; Kemmochi, Kiyoshi
Composites Science and Technology, 72(11), 1298-1303, 2012年06月 - 繊維強化プラスチックにおけるドライサンドエロージョンの特性
鮑力民、剣持潔
繊維機械学会誌, 65(9), 530-536, 2012年 - FRP相間破壊靭性に充てん中空フィラーが及ぼす影響
鮑力民、黒田勇貴、徐安長、剣持潔
日本複合材料学会誌, 38(3), 101-106, 2012年 - Determination of Creep Life of Glass Fiber/Phenol Coposite Filled with Carbon Nanotubes by Four-Point Fkexual Creep Test
A. Xu, H. Nozaki, L. Bao, K. Kemmochi
Jpn. J. Appl. Phys., 51(1), o1AK03-1～5, 2012年 - Solid Particle Erosion Characteristics of Composites Filled with Nano Carbon Fibers
L. Bao, D. Qian, G. Wang, K. Kemmochi
J. Text.Eng., 58(2), 13-19, 2012年 - Measurement and Evaluation Methods for Damage from Dry Sand Erosion in a Hot Environment
L. Bao, D. Li, D. Qian, K. Kemmochi, A. Yamanaka
Text. Res. J., 82(15), 1612-1617, 2012年 - Electric Capacity Characteristic of of Nanofiber/Vulcanized Rubber
Limin Bao, Yuya Kumazaki, Kiyoshi Kemmochi, and Naoya Amino
Adv. Composite Mat., 20(1), 65-78, 2011年 - Optimum Decomposition Conditions for Glass Fiber Reinforced Plastic Recycling by Superheated Steam
Jian Shi and Limin Bao
Jpn. J. Appl. Phys, 50(1), 01AJ01-01AJ05, 2011年 - バグフィルター集塵機におけるマルチパルスジェットによるダストの払い落とし効率の向上
鮑力民，郁明々, 木嶋敬昌, 夘山貞信, 剱持潔
日本機械学会論文集C編, 77(1), 179-186, 2011年 - 光ファイバセンサによるFRPエロージョンの予知
鮑 力民、赤羽賢一、施 建、剱持 潔
日本複合材料学会誌, 37(6), 209-215, 2011年 - Improvement of Erosion Behavior and mechanical strength of UP Resin Composites filled with VGCF
D. Qian, A. Xu, L. Bao, M. Takatera
Appl. Mech. Mat., 43, 712-716, 2011年 - Structural Analysis of a Teat Cup Liner
L. Bao, A. Adachi, O. Yamazaki
Appl. Mech. Mat., 43, 675-677, 2011年 - Development of recycling System for Fiber-Reinforced Plastics by Superheated Steam
J. Shi, S. Wada, K. Kemmochi, L. Bao
Key Eng. Mat., 464, 414-418, 2011年 - Research on FRP Composite Structures with Self-healing Function
C. Uchijo, Y. Kuroda, K. Kemmochi, L. Bao
Adv. Mat. Res., 332-334, 31-34, 2011年 - Development of Hybrid FRP Materials with Super Fibers for Improving Impact Properties
Z. Gong, K. Kemmochi, L. Bao
Adv. Mat. Res., 332-334, 678-682, 2011年 - Research in Recycling Technology of Fiber Reinforced Polymers for Reduction of Environmental Load:Optimum Decomposition Conditions of Carbon Fiber Reinforced Polymers in the Purpose of Fiber Reuse
J. Shi, K. Kemmochi, L. Bao
Adv. Mat. Res., 343-344, 142-149, 2011年 - Friction Characteristics of Fabrics with Air
L. Bao, Y. Umena, K. Kemmochi
J. Text. Inst., 102(7), 598-603, 2011年 - ストリングス間隔・張力・粘性によるボールの反発挙動への影響
鮑 力民, 轟 純一, 銭 丹娜, , 剱持 潔
Journal of Textile Engineering, 56(1), 1-8, 2010年 - ナノ繊維充てんゴムのひずみに伴う電気容量の変化
鮑 力民, 熊崎 裕也, 銭 丹娜, 剱持 潔, 網野直也
日本複合材料学会誌, 36(1), 4-10, 2010年 - 空気層を利用したエアバッグにおける摩擦力の低減
鮑 力民，梅名裕士，銭 丹娜，高寺政行，剱持 潔
日本機械学会論文集A編, 76(761), 69-74, 2010年 - Improvement of the Bending Characteristics of Thin FRP Cylinders by Imitating Nodes of Bamboo
Limin BAO, Natsuki KAMADA, Danna QIAN
ADVANCED COMPOSITE MATERIALS, 19(2), 157-170, 2010年 - スモック技法を利用した織物の曲面形成について
篠原 昭、鮑 力民
信州短期大学紀要, 21, 1-5, 2010年 - Fiber-reinforced polymer composite materials with high specific strength and excellent solid particle erosion resistance
Danna Qian, Limin Bao, Masayuki Takatera, Kiyoshi Kemmochi and Atsuhiko Yamanaka
Wear, 268(3-4), 637-642, 2010年 - Dry Sand Erosion Damage Characteristic of Fibers Induced by Solid Particle Impact,
Limin BAO, Yasuyuki Sato, Danna QIAN, Satoshi Simakawa, Zhijuan Pan and Shigeru Hinata
Text. Res. J., 80(16), 1675-1681, 2010年 - An Impact Abrasion Tester based on Mechanical Change of Fibers
Y. Gao, L. Bao
J. Text. Res. China, 30(12), 121-124, 2009年 - Discussion on abrasion mechanism and testing means of fibrous filtration materials.
Y. Gao, L. Bao
Technic. Text., 223, 45-48, 2009年 - Study on wear measurement techniques for alumino-silicate fiber blanket etc. materials.
Y. Gao, L. Bao
Technic. Text., 221, 42-46, 2009年 - Particle Erosion Behavior ofUnidirectional CF and GF Hybrid Fiber - Reinforced Plastic Composites
QIAN Danna, BAO Limin, TAKATERA Masayuki, KEMMOCHI Kiyoshi,
J. Text. Eng., 55(2), 39-44, 2009年 - Impact Force when Fabric Inflates at High Speed
Limin Bao and Kiyoshi Kemmochi
Text. Res. J., 79(9), 837-843, 2009年 - 繊維および糸におけるエロージョンの測定と評価法
鮑 力民, 銭 丹娜, 佐藤康之, 島川 聡,高寺 政行, 日向 滋, 剱持潔
日本機械学会論文集A編, 74(3), 428-433, 2008年 - 竹を模倣した節付きFRP薄肉円筒の開発
鮑 力民, 鎌田夏葵, 銭 丹娜, 白井智広, 後藤 卒土民, 剱持 潔
日本複合材料学会誌, 34(6), 219-225, 2008年 - エアバッグにおける緩衝特性に関する研究
鮑 力民，西城 英莉，銭 丹 娜，高寺 政行，剱持 潔
日本機械学会論文集A編, 74(11), 1453-1458, 2008年 - Relationship Between Uniaxial and Strip Biaxial Tensile Properties of Fabrics
Jiaming Xheng, Takuya Komatsu, Masayuki Takatera. Shigeru Inui, Limin Bao, Yoshio Shimizu
Text. Res. J., 78(3), 224-231, 2008年 - バグフィルタを通過する混相流動の可視化とバグフィルタ摩耗機構に関する研究
島川 聡, 日向 滋, 鮑 力民, 渡辺 義見, 木嶋 敬昌, 清水 秀彦
混相流, 21(3), 288-296, 2007年 - VGCF充てんによる加硫ゴムの引裂き物性の向上
鮑 力民, 桜井正幸, 前田 聡代,網野直也
日本機械学会論文集A編, 73(11), 1253-1258, 2007年 - 織物の力学特性が衝撃力に与える影響
鮑 力民, 高寺政行, 劒持 潔
日本機械学会論文集C編, 73(12), 3193-3197, 2007年 - Relationship Between Strain and Electrical Resistivity of Vulcanized Rubber Filled with Carbon Nanofiber
L. Bao, K. Todaka, I. Yamaura, Z. Pan, N. Amino and K. Kemmochi,
Open Mat. Sci. J., 1, 13-17, 2007年 - 畳の敷き方についての－考察
篠原 昭, 鮑 力民
信州短期大学紀要, 19, 26-29, 2007年 - 充てん剤補強加硫ゴムの引裂き物性に及ぼす時間，温度の影響
鮑 力民, 桜井正幸, 鑓 恵介,網野直也, 三橋健八
日本機械学会論文集A編, 73(2), 232-237, 2007年 - ファイバセンサによるバグフィルタの寿命予知
島川 聡, 日向 滋, 鮑 力民, 渡辺 義見, 木嶋 敬昌, 清水 秀彦
計測自動制御学会産業論文集, 5(6), 35-42, 2006年 - 繊維強化プラスチック3Rパッチの可能性
剱持 潔, 榎本祐嗣, 鮑 力民, 後藤 卒土民
強化プラスチック, 52(7), 295-301, 2006年 - Analytical modeling of suction cups used for window-cleaning robots
J. Liu, K. Tanaka, L. Bao, I. Yamaura
Vacuum, 80(6), 593-598, 2006年 - A Study on the Torsional Wave of Fiber Reinforced Composite Materials
L. BAO, H. YUAN, M. SAKURAI, M. NAKAZAWA, and K. KEMMOCHI
Journal of Composite Materials, 40(4), 383-391, 2006年 - A novel approach for evaluating the air permeability of airbag fabrics
X.H.Wang, L.Bao and M. Nakazawa
T.R.J., 76(1), 66-70, 2006年 - エアバッグの高速展開による衝撃力の測定 : エアバッグの高速展開による衝撃力I(機械力学,計測,自動制御)
鮑 力民，桜井正幸，劒持 潔
日本機械学会論文集C編, 72(719), 2214-2218, 2006年 - FRP積層円筒の緩衝特性(機械力学,計測,自動制御)
鮑 力民；梅田大輔；桜井正幸；劒持 潔
日本機械学会論文集. C編, 71(702), 380-385, 2005年 - Relation Between Frictional Characteristics and the Strings' Ability to Make a Tennis Ball Spin
L. BAO, M. SAKURAI and M.NAKAZAWA
T.R.J, 73(7), 570-574, 2003年 - 織物の力学的特性がMITドレープ挙動に与える影響
鮑 力民,高寺政行,澤田 宏一,桜井正幸,中沢 賢,篠原 昭
繊維学会誌, 58(3), 77-83, 2002年 - FRP積層円筒のねじり減衰特性
鮑 力 民，田村明博, 桜井正幸, 中沢 賢, 劒持 潔
日本複合材料学会誌, 28(2), 50-55, 2002年 - M.I.Tドレープと織物の力学特性の関係
鮑 力民;高寺政行;澤田宏一;桜井正幸;中沢 賢;篠原 昭
繊維学会誌, 58(3), 77-83, 2002年 - Restitution characteristics of yarns in the axial direction
L. BAO, M. SAKURAI, M.TAKATERA, M.NAKAZAWA and A.SHROHARA
T.R.J, 72(8), 689-692, 2002年 - ラケット・ストリングスの反発性能の評価(機械力学,計測,自動制御)
鮑 力民,桜井 正幸,小山 恭史,中沢 賢,篠原 昭
日本機械学会論文集C編, 68(665), 96-100, 2002年 - テニスストリングスによるボールスピンのかかり具合の評価(機械力学,計測,自動制御)
鮑 力民, 桜井 正幸, 中沢 賢
日本機械学会論文集. C編, 68(676), 3486-3490, 2002年 - テニスストリングスの剛体との反発挙動の測定
鮑力民;高寺政行;飯田一;岩本大栄;篠原昭
日本機械学会論文集C編, 65(630), 580-586, 1999年 - 直径方向の力学特性を考慮したテニスストリングの反発挙動の解析
鮑 力民;高寺 政行;飯田 一;小山 恭史;篠原 昭
日本機械学会論文集C編, 65(632), 1319-1324, 1999年 - せん断変形を拘束しない1軸荷重による織物の大変形
高寺政行;雲田直子;鮑力民;清水義雄;上條正義;細谷聡;飯田一
繊維学会誌, 55(7), 306-314, 1999年 - 一軸引張り試験による織物の見掛けのせん断剛性の測定
鮑力民;高寺政行;篠原昭;山下重和
繊維学会誌, 53(4), 139-145, 1997年 - 一軸伸張による織物の見掛けのポアソン比測定における誤差の評価
鮑力民;高寺政行;篠原昭
繊維学会誌, 53(1), 20-26, 1997年 - 曲げヒステリシスを考慮した布の大たわみ挙動の解析
鮑 力民;高寺政行;篠原 昭
繊維学会誌, 52(2), 69-75, 1996年 - Post-buckling behavior of silk fabric and prediction
M.Takatera/ L.Bao /A.Shinohara
J.Seric.Sci.Jpn, 65(6), 477, 1996年 - 両端を固定した布の大たわみにおける自重と初期たわみの影響
鮑 力民;高寺政行;篠原 昭
繊維学会誌, 52(1), 18-26, 1996年 - 曲げヒステリシスを考慮した織物の曲げ振動
鮑 力民
繊維学会誌, 50, 92, 1994年 - 非線形最小自乗法による布の曲げ振動特性値の推定
高寺政行;鮑 力民;篠原 昭
繊維学会誌, 50(8), 335-342, 1994年 - 曲げヒステリシスを考慮した織物の振動解析
鮑 力民;高寺政行;篠原 昭
繊維学会誌, 50(2), 92-96, 1994年 - 布の曲げ振動における自重の影響
鮑 力民，高寺政行，篠原 昭
繊維学会誌, 49, 383-386, 1993年 - 布の動的曲げ剛性と静的曲げ剛性
鮑 力民，高寺政行，篠原 昭
繊維学会誌, 49(12), 642-647, 1993年
書籍等出版物
講演・口頭発表等
- Improving Stab-resistant of Textile Materials,
Limin BAO
2st International Symposium on Advanced Fiber Technology and Material Application, 2018年12月15日 - Trend of research and development on composite material in Japan
Limin BAO
Japan-China Textile & Composite Symposium 2018, 2018年09月08日 - Textile technology and development of high performance composite material
Limin BAO
International Industrial Fiber and Textile Conference, 2017年11月 - Improving bending characteristics of CFRP sandwich structures with reinforcement webs
Limin BAO
Japan-China Textile&Composite Symposium, 2017年09月 - EVAPORATION-INDUCED SURFACE MODIFICATION OF PBO FIBER AND INVESTIGATION ITS UV RESISTANCE
Peng Zhu, Limin Bao
21st International Conference on Composite Materials, 2017年08月 - Improvement of compressive performance of fiber reinforced plastic by the textile technology
Limin Bao, Ryo Sakurada, Fangtao Ruan
Cross-straits Conference on Textiles, 2017年05月 - Character of erosion and mechanical behavior of a new structural hybrid reinforced PEI composite
Liu Bing, Bao Limin
The 9th International Silk Conference (ISC 2016, China), 2016年09月 - Development of High Density Nonwoven Structure for Improving Stab Resistance
Yanling Wang, Limin Bao, Morikawa Emei, Takeichiro Baba, Yasuhiro Fukuda
The 9th International Silk Conference (ISC 2016, China), 2016年09月 - Fabrication of surface-modified TiO2 nano particle composite
Zhu Peng, Bao Limin
The 9th International Silk Conference (ISC 2016, China), 2016年09月 - Preparation of double-coated TiO2 nanoparticles and investigation of the UV resistance of its reinforced PEI film
Peng Zhu, Limin Bao
The 12th China-Japan Joint Conference on Composite Materials (CJJCC-12), 2016年09月 - Development of a composite material with high mechanical properties by the textile technology
Limin BAO
International Symposium on Advanced Fiber Technology and Material Application, 2016年07月 - Discovery of the new feature, new molding method of advanced continuation fiber-reinforced plastics for sustainable circulation society
Limin BAO
The 63th Taiwan textile process Society conference, 2015年12月 - Study on solid erosion properties of fiber-reinforced thermoplastics with high heat-resistant properties
Liu Bing, Bao Limin
The 13th Asian Textile Conference, 2015年11月 - Improvement of flexural properties of FRP by filament cover method
Ryo Sakurada, Fangtao Ruan, Bao Limin
The 13th Asian Textile Conference, 2015年11月 - Influence of nonwoven fabric structure of bag filters on the dust dislodgement efficiency
Limin BAO, M. Musadiq, TAKAMASA Kishima
2015 China Textile Academic Conference, 2015年10月 - Development of molding method of continuous fiber-reinforced thermoplastics (FRTP) to achieve a high fiber volume fraction with high mechanical properties
Limin BAO
2014 China Textile Academic Conference, 2014年10月 - The discovery of the new feature, new molding method of advanced continuation fiber-reinforced plastics for sustainable circulation society
Limin BAO
Academic forum on advanced textile materials and processing technique, 2013年12月 - PBO fabric reinforced thermoplastic composite manufactured by solution impregnation method
A. Xu, L. Bao
19th International Conference on Composite Materials (ICCM19), 2013年 - Study on the plasticity of fiber reinforced plastic under bending moment
A. Xu, J. Shi, L. Bao
42nd Textile Research Symposium at Mt. Fuji, 2013年 - Polymer re-using of waste fiber reinforced polymer by superheated steam
J. Shi, L.Bao, K. Kemmochi
POLYCHAR21 World Forum on Advanced Materials, 2013年 - Mechanical Property of Recycled Fiber Reinforced Polymer Composites by Superheated Steam
J. Shi, J. Kato, L. Bao, K. Kemmochi
2013 Asian Pacific Conference on Mechatronics and Control Engineering, 2013年 - Compression after Impact Properties of Recycled Glass Fiber Reinforced Polymer
J. Shi, J. Kato, L. Bao, K. Kemmochi
21th Annual International Conference on Composites/Nano Engineering, 2013年 - High Value Fiber Recycling of Waste Fiber Reinforced Plastic for Sustainable Society
J. Shi, A. Xu, L. Bao
42nd Textile Research Symposium at Mt. Fuji, 2013年 - Improvement in Adhesion Property of Recycled Glass Fiber
J. Shi, L.Bao, K. Kemmochi
8th International Silk Conference, 2013年 - Nanoparticles Coated UHMWPE Fiber by Pyrrole Vapour Deposition to Improve Transversal Compressive Strength
R. Fangtao, L. Bao
POLYCHAR21 World Forum on Advanced Materials, 2013年 - Surface Modification of UHMWPE Fiber for Improving Compressive Modulus of UFRP
R. Fangtao, L. Bao
42nd Textile Research Symposium at Mt. Fuji, 2013年 - The Effect of Web Member on Bending Characteristic of CFRP Sandwich Structure
Y. Miura, M. Ono, L.Bao, K. Kemmochi
12th Asian Textile Conference, 2013年 - Nano-carbon Particles Coated UHMWPE Fiber by Pyrrole Vapour Deposition to Improve Transversal Compressive and Bend Strength
R. Fangtao, L. Bao
12th Asian Textile Conference, 2013年 - Development of New Molding Method for CFRP with High Fiber Fraction and Its Mechanical Properties
T. Fujii, A. Xu, L.Bao, K. Kemmochi
12th Asian Textile Conference, 2013年 - Effect of Decomposition Parameters on Tesile Strength of Recycled Glass Fiber
J. Shi, J. Kato, L. Bao, K. Kemmochi
10th China-Japan Joint Conference on Composits(CJCC-10), 2012年 - Fiber Reinforced Plastic with High Specific Strerngth and Excellent Solid Particle Erosion Resistance
L. Bao, D. Qian, K. Kemmochi
10th China-Japan Joint Conference on Composits(CJCC-10), 2012年, 招待有り - Improving Fiber Bag Cleaning Efficiency Using Multiple Jet Pulses
L. Bao, M.M. Yu, T. Kishina, K. Kemmochi
Textile Bioengineering and Informatics Symposium(TBIS2012), 2012年 - Improving the Creep Life of Glass Fiber Reinforced Plastic Composite by Carbon Nanotubes
A. Xu, L. Bao, K. Kemmochi
10th China-Japan Joint Conference on Composits(CJCC-10), 2012年 - Research in Recycling Technology of Fiber Reinforced Polymers by Superheated Steam; Effect of Surface Treatment on Recycled Glass Fiber
J. Shi, R. Kobayashi, L. Bao
36th International Conference and Expo on Advanced Ceramics and Composites, 2012年 - Solid Particle Erosion Resistance of the Super Fiber Reinforced Plastic
L. Bao, D. Qian
2012 China Textile Academic Conference, 2012年, 招待有り - Electric Characteristics of the Carbon Nanotube Filling Rubber and Application to a Large Strain Sensor
L. Bao
International Panel Discussion for New Technology 1-5, 2011年05月12日, 招待有り - Research in Recyling Technology of the Fiber Reinforced Polymers for Reduction of Environmental Load: Optimum Decomposition Conditions of Carbon Fiber Reinforced Polymers in the Purpose of Fiber Reuse
J. Shi, K. Kmmochi, L. Bao
2011 International Conference on Materials for Environmental Protection and Energy Application, 2011年 - Creep Life of GFRP Composite Illed with CNTs
X. Anchang, H. Nozaki, L. Bao, K. Kemmochi
2011 China Textile Academic Conference, 2011年 - Development and Research of Sustainable Recycling Technology of Fiber Reinforced Plastics
J. Shi, S. Wada, J. Kato, K. Kemmochi, L. Bao
2011 China Textile Academic Conference, 2011年 - Study on Improving Fabric Filter Performance of a Bag Filter Dust Collector
M. M. B. M. Hashim, L. Bao, M. Yu, T. Kishima, S. Uyama, K. Kemmochi
2011 China Textile Academic Conference, 2011年 - Development of the Evaluation Equipment of Stab Resistance for Textile Materials
S. Soma, T. Bingo, H. Morikawa, L. Bao
2nd Asian Protective Clothing Conference, 2011年 - Development of the High Strength Light Weight FRP Structure by the Biomimetic Design
L. Bao
2nd Textile Academic Forum, 2010年10月12日, 招待有り - A Strain Sensor which used the Capacity Characteristic of VGCF/Vulcanized Rubber
L. Bao, K. Kemmochi, N. Amino
9th China-Japan Joint Conference on Composites(CJJCC-9), 2010年09月12日, 招待有り - Friction Decrease of Airbags with Air
L. Bao, A. Xu, Y. Umena
7th China International Silk Conference, 2010年09月12日 - Mechanical Charactereitics of Tire Rubber Filled with Polymer Micro-Fiber
H. Wada, L. Bao, N. Amino
6th China-Japan International Conference Mechatronics(CJCM2010), 2010年09月12日 - Recycling System for Fiber-Reinforced Plastics
L. Bao, J. Shi, K. Kemmochi
9th China-Japan Joint Conference on Composites(CJJCC-9), 2010年09月12日 - Development of FRP Composites with Excellent Erosion Resistance by Solid Particles
D.N. Qian, L. Bao, M. Takatera, A. Yamanaka
17th International Conference on Composite Materials (ICCM-17), 2009年 - Development of FRP Composites with High Specific Strength and Excellent Erosion Resistance
D. Qian, L. Bao, M. Takatera, A. Yamanaka
7th East Asian Symposium on Polymers For Advanced Technologies (EASPAT-2009), 2009年 - Electric Capacitance Changes under Strain of Nanofiber/Vulcanized Rubber
L. Bao, Y. Kumazaki, D. Qian, N. Amino
10th Asian Textile Conference (ATC-10), 2009年 - Solid particle erosion behavior of polymer composites filled with VGCF and CB
D. Qian, L. Bao, G. Wang, M. Takatera
10th Asian Textile Conference (ATC-10), 2009年 - Study of the Relationship between Residual Dust and Dust Dislodgement Efficiency of Bag Filter——Development of the Accelerative Dust Deposit Equipment
M. Yu, L. Bao, K. Takamasa
10th Asian Textile Conference (ATC-10), 2009年 - Study on Solid Particle Behaviors of FRP Composites --Effect of reinforcement fiber and nano fillers
D. Qian, L. Bao, M. Takatera, A. Yamanaka
5th International Conference on Adovanced Fiber/Textile Materials 2009 in Ueda., 2009年 - The Possibility of FRP Recycling by Overheated Vapor and the Mechanical Property of Recycled Glass Fiber
J. Shi, L. Bao, S. Wada
10th Asian Textile Conference (ATC-10), 2009年 - Production Method of Thin FRP Cylinders by Imitating Nodes of Bamboo
L.Bao, D. Qian, S. Gotou, K. Kemmochi
8th China-Japan Joint Conference on Composites (CJJCC-8), 2008年10月 - Study on the Manifestation of Selfhealing from the Integration of Microcapsules and Fiber Reinforced Plastics
K. Kemmochi, T. Kumakura, L. Bao
8th China-Japan Joint Conference on Composites (CJJCC-8), 2008年10月 - Manifestation of noise insulation function in FRP due to disperse bell-structural microcapsules
K. Kemmochi, L. Bao, and S. Gotoh
11th Japan-European Symposium on Composite Materials, 2008年09月 - Evaluation of Particle Erosion Behavior of Procon Fiber under Various Temperatures
D. Li, D. Qian, L. Bao, K. Kemmochi
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - The relationship strain and electric characteristics of rubber filled with VGCFs
Y. Kumazaki, T. Todaka, L. Bao, N. Amino, K. Kemmochi
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Measuring dynamic surface strain and friction coefficient for car tire rubber
S. Takahashi, L. Bao, N. Amino, K. Kemmochi,
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Development of FRP Thin Cylinder with Nodes that Imitate Bamboo
L. Bao, N. Kamada, D. Qian, T. Sshirayi, S. Gotoh, K. Kemmochi
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Manifestation of noise insulation function in FRP due to disperse bell-structural microcapsules
T. Kumakura, K. Kemmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Inverse Manufacturing Technology for Waste Fiber-Reinforced Plastics
Z. Jue, K. Kemmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Improvement of Inter-laminar Shear Strength in Thick FRP Laminates by Dispersing CNT into the Matrix Resin
H. Nozaki, K. Kemmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Mechanical Properties of Monocoque Shell Structures
S. Kondo, K. Kmmochi, L. Bao, S. Gotoh
5th Japan-China Conference on Mechatronics (JCCM2008), 2008年 - Improving Tear Characteristics of Vulcanized Rubber by Filling with vapor-grown carbon fiber
L. Bao, D. Qian, M. Sakurai, S. Maeda, N. Amino
6th China International Silk conference and 2nd International Textile Forum, 2007年 - Measurement and Evaluation of Erosion Characteristic for Fiber and Yarn
L. Bao, D. Li, Y. Sato, S. Shinakawa, Z. Pan, S. Hinata
6th China International Silk conference and 2nd International Textile Forum, 2007年 - High Particle Erosion Resistance Behavior of Unidirectional Dyneema Fiber – Reinforced Plastic Composites
D. Qian, L. Bao, M. Takatera, K. Kemmochi, A. Yamanaka
4th Chaina-Japan Conference on Mechatronics 2007 (CJCM 2007), 2007年 - Visualization of gas-particle two-phase flow passing through the bag-filter and impingingat a single thin fiber by PIV and PTV methods
S. Shimakawa, S. Hinata, Z. Huanjia, T. Mukai, L. Bao, Y. Watanabe
4th China-Japan Conference on Mechatoronics (CJCM2007), 2007年 - The Possibility of a 3R Patch for Fiber-Reinforced Plastics
N. Kubota，Y. Maekawa，K. Kemmochi，L. Bao, S. Gotoh
4th Chaina-Japan Conference onMechatronics 2007 (CJCM 2007), 2007年 - Fabrication and the Tensile Property of Intra Hybrid Laminates C50/G50
T. Ohgi, S. Maeda, K. Kemmochi, L. Bao, S. Gotoh
4th Chaina-Japan Conference on Mechatronics 2007 (CJCM 2007), 2007年 - Particle Erosion Behavior of Hybrid Unidirectional Fiber Reinforced Plastic Composites
D. Qian, L. Bao, K. Kemmochi
36th Textile Research Symposium at Mt. Fuji, 2007年 - Relationship between strain and electrical characteristics of vulacanized rubber rilled with carbon nanofiber
Y. Kumazaki, T. Todaka, N. Amino, L. Bao
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007年 - Study on solid particle erosion behavior of unidirectional fiber reinforced plastic composites
D. Qian, L. Bao, M. Takatera, K. Kemmochi, A. Yamanaka
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007年 - A study on the erosive wear mechanism of bag-filiter
S. Shimakawa, S. HinataI, L. Bao, Y. Watanabe
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007年 - Research on impact force of fabrics when airbag inflates at high speed
L. Bao, K. Kemmochi
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007年 - Research on erosion damage of fibers in bag-filter by solid particle impact
L. Bao, Y. Sato, S. Simakawa, Z. Pan, S. Hinata
4th International Conference on Advanced Fiber/Textile Materials 2007 in Ueda (ICAFTM2007), 2007年 - The Possibility of a 3R Patch for Fiber-Reinforced Plastics
K. Kemmochi, N. Kubota，Y. Maekawa，S. Gotoh, L. Bao
6th International Symposium on Advanced Composites, 2007年, 招待有り
共同研究・競争的資金等の研究課題
